This is the latest recevied telemetry packets stored in our database for station/object OH7LZB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757904739 | 3832 | 3473 | 3182 | 0 | 0 |
| 1757903904 | 3835 | 3478 | 3179 | 0 | 0 |
| 1757903054 | 3838 | 3481 | 3182 | 0 | 0 |
| 1757902309 | 3838 | 3481 | 3185 | 0 | 0 |
| 1757901449 | 3835 | 3478 | 3188 | 0 | 0 |
| 1757900644 | 3835 | 3473 | 3191 | 0 | 0 |
| 1757899777 | 3835 | 3484 | 3191 | 0 | 0 |
| 1757898934 | 3835 | 3475 | 3194 | 0 | 0 |
| 1757898184 | 3838 | 3478 | 3191 | 0 | 0 |
| 1757897309 | 3835 | 3475 | 3185 | 0 | 0 |
| 1757896529 | 3838 | 3484 | 3188 | 0 | 0 |
| 1757895724 | 3838 | 3478 | 3188 | 0 | 0 |
| 1757894969 | 3838 | 3484 | 3188 | 0 | 0 |
| 1757894178 | 3838 | 3481 | 3174 | 0 | 0 |
| 1757893369 | 3838 | 3478 | 3165 | 0 | 0 |
| 1757892634 | 3841 | 3481 | 3165 | 0 | 0 |
| 1757891874 | 3841 | 3484 | 3156 | 0 | 0 |
| 1757890984 | 3843 | 3487 | 3153 | 0 | 0 |
| 1757890254 | 3843 | 3478 | 3148 | 0 | 0 |
| 1757889464 | 3846 | 3481 | 3145 | 0 | 0 |
| 1757888699 | 3846 | 3484 | 3139 | 0 | 0 |
| 1757887964 | 3849 | 3487 | 3139 | 0 | 0 |
| 1757887129 | 3852 | 3490 | 3136 | 0 | 0 |
| 1757886264 | 3858 | 3493 | 3130 | 0 | 0 |
| 1757885384 | 3861 | 3498 | 3133 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)