K0FTT Automobiles

My position About ☰

reset

N0PRG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N0PRG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbatt*	Vsolar*	VbattTemp*	intTemp*	extTemp*
1742069639	14.09 Volts	45.5 Volts	41 F	62 F	44 F
1742069041	14.07 Volts	42.3 Volts	41 F	62 F	44 F
1742068438	14.06 Volts	40.9 Volts	41 F	62 F	44 F
1742067840	14.08 Volts	40.9 Volts	41 F	60 F	44 F
1742067239	14.07 Volts	44.4 Volts	41 F	60 F	44 F
1742066637	14.05 Volts	43.8 Volts	41 F	60 F	44 F
1742066039	14.07 Volts	43.5 Volts	41 F	60 F	44 F
1742065440	14.05 Volts	39.7 Volts	41 F	60 F	44 F
1742064839	14.06 Volts	43.4 Volts	39 F	59 F	44 F
1742064241	14.05 Volts	43.6 Volts	39 F	59 F	42 F
1742063638	14.65 Volts	43.2 Volts	39 F	60 F	42 F
1742063039	14.67 Volts	41.7 Volts	39 F	59 F	42 F
1742061239	14.64 Volts	40.6 Volts	39 F	57 F	41 F
1742060637	14.64 Volts	42.6 Volts	37 F	55 F	41 F
1742060039	14.66 Volts	43.5 Volts	37 F	55 F	41 F
1742059438	14.62 Volts	42.4 Volts	37 F	55 F	39 F
1742058840	14.61 Volts	43 Volts	37 F	55 F	37 F
1742058239	14.62 Volts	42.5 Volts	37 F	55 F	37 F
1742057640	14.59 Volts	42.4 Volts	37 F	55 F	37 F
1742056439	14.57 Volts	41.2 Volts	37 F	53 F	37 F
1742055241	14.41 Volts	36.2 Volts	37 F	53 F	33 F
1742054639	14.39 Volts	35.8 Volts	37 F	51 F	33 F
1742054038	14.47 Volts	37.9 Volts	35 F	51 F	33 F
1742052838	13.78 Volts	42.3 Volts	33 F	50 F	32 F
1742052239	13.01 Volts	38.9 Volts	33 F	50 F	32 F

*Used Equation Coefficients:

Vbatt: 0, 0.01, 0

Vsolar: 0, 0.01, 0

VbattTemp: 0, 1, 0

intTemp: 0, 1, 0

extTemp: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)