This is the latest recevied telemetry packets stored in our database for station/object SR2CSR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791155160 | 317 Count | 532 Count | 284 Count | 0 VDC | 0 VDC |
| 1791153360 | 297 Count | 505 Count | 265 Count | 0 VDC | 0 VDC |
| 1791151559 | 280 Count | 480 Count | 250 Count | 0 VDC | 0 VDC |
| 1791149758 | 264 Count | 456 Count | 235 Count | 0 VDC | 0 VDC |
| 1791147957 | 243 Count | 427 Count | 216 Count | 0 VDC | 0 VDC |
| 1791146156 | 217 Count | 394 Count | 191 Count | 0 VDC | 0 VDC |
| 1791144364 | 186 Count | 343 Count | 166 Count | 0 VDC | 0 VDC |
| 1791142563 | 170 Count | 312 Count | 151 Count | 0 VDC | 0 VDC |
| 1791140763 | 155 Count | 278 Count | 138 Count | 0 VDC | 0 VDC |
| 1791138962 | 136 Count | 244 Count | 120 Count | 0 VDC | 0 VDC |
| 1791137161 | 120 Count | 214 Count | 106 Count | 0 VDC | 0 VDC |
| 1791135360 | 105 Count | 188 Count | 92 Count | 0 VDC | 0 VDC |
| 1791133559 | 89 Count | 163 Count | 78 Count | 0 VDC | 0 VDC |
| 1791131759 | 67 Count | 121 Count | 57 Count | 0 VDC | 0 VDC |
| 1791129958 | 52 Count | 87 Count | 44 Count | 0 VDC | 0 VDC |
| 1791128157 | 37 Count | 58 Count | 30 Count | 0 VDC | 0 VDC |
| 1791126356 | 19 Count | 27 Count | 14 Count | 0 VDC | 0 VDC |
| 1791124555 | 4 Count | 1 Count | 0 Count | 0 VDC | 0 VDC |
| 1791122764 | 617 Count | 981 Count | 532 Count | 0 VDC | 0 VDC |
| 1791120963 | 603 Count | 938 Count | 519 Count | 0 VDC | 0 VDC |
| 1791119162 | 588 Count | 892 Count | 506 Count | 0 VDC | 0 VDC |
| 1791117362 | 573 Count | 863 Count | 492 Count | 0 VDC | 0 VDC |
| 1791115561 | 553 Count | 819 Count | 474 Count | 0 VDC | 0 VDC |
| 1791113760 | 539 Count | 798 Count | 461 Count | 0 VDC | 0 VDC |
| 1791111959 | 522 Count | 775 Count | 446 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 1, 0
V_Ext: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)