This is the latest recevied telemetry packets stored in our database for station/object SP2WM-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785403804 | 493 Count | 715 Count | 114 Count | 0 VDC | 0 VDC |
| 1785402904 | 492 Count | 715 Count | 114 Count | 0 VDC | 0 VDC |
| 1785402004 | 491 Count | 715 Count | 114 Count | 0 VDC | 0 VDC |
| 1785401102 | 490 Count | 713 Count | 114 Count | 0 VDC | 0 VDC |
| 1785400204 | 488 Count | 708 Count | 113 Count | 0 VDC | 0 VDC |
| 1785399300 | 486 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785398399 | 485 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785397499 | 484 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785396616 | 479 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785395715 | 478 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785394814 | 477 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785393913 | 476 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785393016 | 475 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785392112 | 474 Count | 705 Count | 112 Count | 0 VDC | 0 VDC |
| 1785391211 | 473 Count | 703 Count | 112 Count | 0 VDC | 0 VDC |
| 1785390310 | 471 Count | 690 Count | 111 Count | 0 VDC | 0 VDC |
| 1785389409 | 469 Count | 683 Count | 110 Count | 0 VDC | 0 VDC |
| 1785388509 | 467 Count | 670 Count | 109 Count | 0 VDC | 0 VDC |
| 1785387608 | 465 Count | 655 Count | 108 Count | 0 VDC | 0 VDC |
| 1785384909 | 456 Count | 611 Count | 102 Count | 0 VDC | 0 VDC |
| 1785383104 | 453 Count | 591 Count | 101 Count | 0 VDC | 0 VDC |
| 1785382203 | 451 Count | 577 Count | 100 Count | 0 VDC | 0 VDC |
| 1785381302 | 450 Count | 569 Count | 100 Count | 0 VDC | 0 VDC |
| 1785380402 | 448 Count | 558 Count | 99 Count | 0 VDC | 0 VDC |
| 1785379500 | 447 Count | 550 Count | 99 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)