K0FTT Automobiles

My position About ☰

reset

SP9WJ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9WJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1771216500	1.1 mA	17 C	47 %	1.58 V	3.39 V
1771215575	0.99 mA	17 C	47 %	1.58 V	3.39 V
1771214650	1.02 mA	17 C	48 %	1.58 V	3.39 V
1771213726	0.91 mA	17 C	48 %	1.58 V	3.39 V
1771212801	0.88 mA	17 C	48 %	1.58 V	3.39 V
1771211877	0.89 mA	17 C	49 %	1.58 V	3.37 V
1771210028	0.94 mA	17 C	49 %	1.55 V	3.33 V
1771209103	1.02 mA	17 C	50 %	1.51 V	3.29 V
1771208178	0.88 mA	17 C	51 %	1.58 V	3.37 V
1771197625	0.88 mA	18 C	50 %	1.62 V	3.37 V
1771197080	2.1 mA	18 C	50 %	1.6 V	3.39 V
1771196156	1.77 mA	18 C	50 %	1.6 V	3.39 V
1771195231	2.32 mA	18 C	48 %	1.62 V	3.39 V
1771194306	2.02 mA	18 C	48 %	1.6 V	3.37 V
1771193922	1.38 mA	18 C	48 %	1.6 V	3.37 V
1771192997	1 mA	18 C	49 %	1.6 V	3.39 V
1771191531	2.09 mA	18 C	49 %	1.6 V	3.37 V
1771191155	0.94 mA	18 C	49 %	1.6 V	3.39 V
1771190618	1.93 mA	18 C	48 %	1.62 V	3.39 V
1771190206	0.96 mA	18 C	49 %	1.62 V	3.39 V
1771189681	2.17 mA	18 C	49 %	1.62 V	3.39 V
1771189294	0.99 mA	18 C	49 %	1.6 V	3.39 V
1771188756	2.07 mA	18 C	50 %	1.6 V	3.39 V
1771188368	0.99 mA	18 C	49 %	1.6 V	3.39 V
1771186906	1.73 mA	18 C	50 %	1.6 V	3.39 V

*Used Equation Coefficients:

Value1: 0, 0.01569, 0

Value2: 0, 1, -128

Value3: 0, 1, 0

Value4: 0, 0.02353, 0

Value5: 0, 0.01569, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)