This is the latest recevied telemetry packets stored in our database for station/object SV3GCB-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788783439 | 579 Count | 825 Count | 435 Count | 0 VDC | 0 VDC |
| 1788783427 | 579 Count | 825 Count | 435 Count | 0 VDC | 0 VDC |
| 1788783303 | 578 Count | 825 Count | 435 Count | 0 VDC | 0 VDC |
| 1788782179 | 577 Count | 825 Count | 435 Count | 0 VDC | 0 VDC |
| 1788781272 | 572 Count | 814 Count | 431 Count | 0 VDC | 0 VDC |
| 1788780366 | 569 Count | 809 Count | 429 Count | 0 VDC | 0 VDC |
| 1788779460 | 558 Count | 789 Count | 419 Count | 0 VDC | 0 VDC |
| 1788778553 | 546 Count | 767 Count | 408 Count | 0 VDC | 0 VDC |
| 1788777647 | 534 Count | 747 Count | 397 Count | 0 VDC | 0 VDC |
| 1788776741 | 522 Count | 724 Count | 386 Count | 0 VDC | 0 VDC |
| 1788775990 | 513 Count | 710 Count | 378 Count | 0 VDC | 0 VDC |
| 1788775084 | 502 Count | 687 Count | 368 Count | 0 VDC | 0 VDC |
| 1788774177 | 490 Count | 665 Count | 357 Count | 0 VDC | 0 VDC |
| 1788773271 | 478 Count | 643 Count | 346 Count | 0 VDC | 0 VDC |
| 1788772364 | 463 Count | 620 Count | 332 Count | 0 VDC | 0 VDC |
| 1788771458 | 453 Count | 604 Count | 323 Count | 0 VDC | 0 VDC |
| 1788770552 | 441 Count | 581 Count | 312 Count | 0 VDC | 0 VDC |
| 1788769645 | 438 Count | 576 Count | 310 Count | 0 VDC | 0 VDC |
| 1788768738 | 436 Count | 573 Count | 309 Count | 0 VDC | 0 VDC |
| 1788767832 | 433 Count | 568 Count | 307 Count | 0 VDC | 0 VDC |
| 1788766926 | 426 Count | 559 Count | 301 Count | 0 VDC | 0 VDC |
| 1788766019 | 423 Count | 554 Count | 299 Count | 0 VDC | 0 VDC |
| 1788765112 | 416 Count | 545 Count | 293 Count | 0 VDC | 0 VDC |
| 1788764206 | 411 Count | 539 Count | 289 Count | 0 VDC | 0 VDC |
| 1788763299 | 408 Count | 534 Count | 287 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)