This is the latest recevied telemetry packets stored in our database for station/object SP2AJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789702266 | 439 Count | 658 Count | 389 Count | 0 VDC | 0 VDC |
| 1789701365 | 429 Count | 644 Count | 380 Count | 0 VDC | 0 VDC |
| 1789700464 | 422 Count | 633 Count | 374 Count | 0 VDC | 0 VDC |
| 1789699563 | 414 Count | 621 Count | 367 Count | 0 VDC | 0 VDC |
| 1789698662 | 406 Count | 607 Count | 360 Count | 0 VDC | 0 VDC |
| 1789697761 | 400 Count | 598 Count | 355 Count | 0 VDC | 0 VDC |
| 1789696860 | 390 Count | 585 Count | 346 Count | 0 VDC | 0 VDC |
| 1789695960 | 384 Count | 576 Count | 341 Count | 0 VDC | 0 VDC |
| 1789695059 | 377 Count | 562 Count | 335 Count | 0 VDC | 0 VDC |
| 1789694158 | 368 Count | 548 Count | 327 Count | 0 VDC | 0 VDC |
| 1789693257 | 362 Count | 535 Count | 322 Count | 0 VDC | 0 VDC |
| 1789692357 | 355 Count | 522 Count | 316 Count | 0 VDC | 0 VDC |
| 1789691456 | 350 Count | 508 Count | 312 Count | 0 VDC | 0 VDC |
| 1789690555 | 343 Count | 496 Count | 306 Count | 0 VDC | 0 VDC |
| 1789689654 | 334 Count | 484 Count | 298 Count | 0 VDC | 0 VDC |
| 1789688754 | 324 Count | 467 Count | 289 Count | 0 VDC | 0 VDC |
| 1789687853 | 315 Count | 450 Count | 281 Count | 0 VDC | 0 VDC |
| 1789686952 | 307 Count | 436 Count | 274 Count | 0 VDC | 0 VDC |
| 1789686051 | 299 Count | 421 Count | 267 Count | 0 VDC | 0 VDC |
| 1789685150 | 292 Count | 409 Count | 261 Count | 0 VDC | 0 VDC |
| 1789684250 | 285 Count | 397 Count | 255 Count | 0 VDC | 0 VDC |
| 1789683349 | 278 Count | 386 Count | 249 Count | 0 VDC | 0 VDC |
| 1789682448 | 272 Count | 375 Count | 244 Count | 0 VDC | 0 VDC |
| 1789681547 | 265 Count | 364 Count | 238 Count | 0 VDC | 0 VDC |
| 1789680663 | 258 Count | 354 Count | 232 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)