This is the latest recevied telemetry packets stored in our database for station/object SP5MSV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774455402 | 400 Count | 384 Count | 131 Count | 0 VDC | 0 VDC |
| 1774453602 | 398 Count | 383 Count | 130 Count | 0 VDC | 0 VDC |
| 1774451801 | 396 Count | 382 Count | 129 Count | 0 VDC | 0 VDC |
| 1774450000 | 394 Count | 378 Count | 128 Count | 0 VDC | 0 VDC |
| 1774448199 | 392 Count | 377 Count | 127 Count | 0 VDC | 0 VDC |
| 1774446399 | 391 Count | 377 Count | 127 Count | 0 VDC | 0 VDC |
| 1774444598 | 390 Count | 377 Count | 127 Count | 0 VDC | 0 VDC |
| 1774442797 | 389 Count | 374 Count | 127 Count | 0 VDC | 0 VDC |
| 1774440996 | 388 Count | 373 Count | 127 Count | 0 VDC | 0 VDC |
| 1774439196 | 387 Count | 372 Count | 127 Count | 0 VDC | 0 VDC |
| 1774437404 | 386 Count | 370 Count | 127 Count | 0 VDC | 0 VDC |
| 1774435603 | 385 Count | 369 Count | 127 Count | 0 VDC | 0 VDC |
| 1774433802 | 383 Count | 366 Count | 126 Count | 0 VDC | 0 VDC |
| 1774432002 | 381 Count | 365 Count | 125 Count | 0 VDC | 0 VDC |
| 1774430200 | 379 Count | 362 Count | 124 Count | 0 VDC | 0 VDC |
| 1774428400 | 377 Count | 358 Count | 123 Count | 0 VDC | 0 VDC |
| 1774426600 | 375 Count | 355 Count | 122 Count | 0 VDC | 0 VDC |
| 1774424798 | 374 Count | 355 Count | 122 Count | 0 VDC | 0 VDC |
| 1774422998 | 373 Count | 355 Count | 122 Count | 0 VDC | 0 VDC |
| 1774421197 | 371 Count | 353 Count | 121 Count | 0 VDC | 0 VDC |
| 1774419396 | 369 Count | 349 Count | 120 Count | 0 VDC | 0 VDC |
| 1774417595 | 368 Count | 348 Count | 120 Count | 0 VDC | 0 VDC |
| 1774415803 | 366 Count | 345 Count | 119 Count | 0 VDC | 0 VDC |
| 1774414002 | 364 Count | 338 Count | 118 Count | 0 VDC | 0 VDC |
| 1774412201 | 363 Count | 338 Count | 118 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)