This is the latest recevied telemetry packets stored in our database for station/object ON4CDR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775753981 | 293 Count | 422 Count | 0 Count | 0 VDC | 0 VDC |
| 1775753912 | 145 Count | 200 Count | 0 Count | 0 VDC | 0 VDC |
| 1775753078 | 273 Count | 396 Count | 0 Count | 0 VDC | 0 VDC |
| 1775752175 | 252 Count | 363 Count | 0 Count | 0 VDC | 0 VDC |
| 1775751272 | 231 Count | 328 Count | 0 Count | 0 VDC | 0 VDC |
| 1775750369 | 209 Count | 290 Count | 0 Count | 0 VDC | 0 VDC |
| 1775749890 | 107 Count | 142 Count | 0 Count | 0 VDC | 0 VDC |
| 1775749466 | 188 Count | 261 Count | 0 Count | 0 VDC | 0 VDC |
| 1775748562 | 166 Count | 231 Count | 0 Count | 0 VDC | 0 VDC |
| 1775747659 | 145 Count | 200 Count | 0 Count | 0 VDC | 0 VDC |
| 1775747548 | 85 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
| 1775746756 | 125 Count | 171 Count | 0 Count | 0 VDC | 0 VDC |
| 1775745943 | 64 Count | 84 Count | 0 Count | 0 VDC | 0 VDC |
| 1775745933 | 107 Count | 142 Count | 0 Count | 0 VDC | 0 VDC |
| 1775745030 | 85 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
| 1775744126 | 64 Count | 84 Count | 0 Count | 0 VDC | 0 VDC |
| 1775743223 | 41 Count | 64 Count | 0 Count | 0 VDC | 0 VDC |
| 1775742320 | 21 Count | 24 Count | 0 Count | 0 VDC | 0 VDC |
| 1775741417 | 585 Count | 1004 Count | 0 Count | 0 VDC | 0 VDC |
| 1775740514 | 566 Count | 975 Count | 0 Count | 0 VDC | 0 VDC |
| 1775739611 | 542 Count | 949 Count | 0 Count | 0 VDC | 0 VDC |
| 1775739299 | 445 Count | 792 Count | 0 Count | 0 VDC | 0 VDC |
| 1775738707 | 524 Count | 914 Count | 0 Count | 0 VDC | 0 VDC |
| 1775737804 | 500 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1775737166 | 428 Count | 758 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)