This is the latest recevied telemetry packets stored in our database for station/object OK2PYA-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777375925 | 974 Count | 550 Count | 151 Count | 0 VDC | 0 VDC |
| 1777373998 | 971 Count | 549 Count | 150 Count | 0 VDC | 0 VDC |
| 1777372071 | 968 Count | 547 Count | 149 Count | 0 VDC | 0 VDC |
| 1777371666 | 967 Count | 547 Count | 149 Count | 0 VDC | 0 VDC |
| 1777369739 | 964 Count | 545 Count | 148 Count | 0 VDC | 0 VDC |
| 1777367812 | 962 Count | 545 Count | 148 Count | 0 VDC | 0 VDC |
| 1777365886 | 959 Count | 542 Count | 147 Count | 0 VDC | 0 VDC |
| 1777363959 | 956 Count | 540 Count | 146 Count | 0 VDC | 0 VDC |
| 1777362032 | 952 Count | 538 Count | 144 Count | 0 VDC | 0 VDC |
| 1777360105 | 948 Count | 536 Count | 142 Count | 0 VDC | 0 VDC |
| 1777358178 | 944 Count | 534 Count | 140 Count | 0 VDC | 0 VDC |
| 1777356252 | 940 Count | 532 Count | 138 Count | 0 VDC | 0 VDC |
| 1777354325 | 935 Count | 529 Count | 135 Count | 0 VDC | 0 VDC |
| 1777352398 | 933 Count | 529 Count | 135 Count | 0 VDC | 0 VDC |
| 1777350471 | 929 Count | 525 Count | 133 Count | 0 VDC | 0 VDC |
| 1777350066 | 928 Count | 525 Count | 133 Count | 0 VDC | 0 VDC |
| 1777348139 | 924 Count | 523 Count | 131 Count | 0 VDC | 0 VDC |
| 1777346212 | 920 Count | 520 Count | 129 Count | 0 VDC | 0 VDC |
| 1777344284 | 916 Count | 517 Count | 127 Count | 0 VDC | 0 VDC |
| 1777342358 | 912 Count | 514 Count | 125 Count | 0 VDC | 0 VDC |
| 1777340431 | 910 Count | 514 Count | 125 Count | 0 VDC | 0 VDC |
| 1777338504 | 907 Count | 513 Count | 124 Count | 0 VDC | 0 VDC |
| 1777336577 | 904 Count | 512 Count | 123 Count | 0 VDC | 0 VDC |
| 1777334651 | 901 Count | 511 Count | 122 Count | 0 VDC | 0 VDC |
| 1777332724 | 897 Count | 509 Count | 120 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)