This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770088941 | 0 Count | 150 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1770088641 | 0 Count | 139 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1770088340 | 0 Count | 129 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1770088040 | 0 Count | 119 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1770087740 | 0 Count | 109 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1770087440 | 0 Count | 99 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1770087140 | 0 Count | 90 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1770086840 | 0 Count | 78 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1770086540 | 0 Count | 69 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1770086240 | 0 Count | 58 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1770085940 | 0 Count | 49 Count | 0 Count | 4.53 VDC | 0 VDC |
| 1770085645 | 0 Count | 38 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1770085345 | 0 Count | 28 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1770085045 | 0 Count | 17 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1770084745 | 0 Count | 9 Count | 0 Count | 4.53 VDC | 0 VDC |
| 1770084445 | 0 Count | 1003 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1770084145 | 0 Count | 995 Count | 0 Count | 4.42 VDC | 0 VDC |
| 1770083845 | 0 Count | 989 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1770083545 | 0 Count | 980 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1770083244 | 0 Count | 970 Count | 0 Count | 4.43 VDC | 0 VDC |
| 1770082944 | 0 Count | 960 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1770082644 | 0 Count | 949 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1770082344 | 0 Count | 938 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1770082044 | 0 Count | 926 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1770081744 | 0 Count | 912 Count | 0 Count | 4.44 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)