This is the latest recevied telemetry packets stored in our database for station/object F4MLV-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781207782 | 43 Count | 66 Count | 36 Count | 0 VDC | 0 VDC |
| 1781204938 | 42 Count | 65 Count | 36 Count | 0 VDC | 0 VDC |
| 1781203134 | 686 Count | 1002 Count | 575 Count | 0 VDC | 0 VDC |
| 1781201330 | 646 Count | 947 Count | 542 Count | 0 VDC | 0 VDC |
| 1781199526 | 609 Count | 898 Count | 512 Count | 0 VDC | 0 VDC |
| 1781199505 | 608 Count | 898 Count | 512 Count | 0 VDC | 0 VDC |
| 1781198358 | 607 Count | 898 Count | 512 Count | 0 VDC | 0 VDC |
| 1781196552 | 568 Count | 849 Count | 480 Count | 0 VDC | 0 VDC |
| 1781195215 | 528 Count | 793 Count | 447 Count | 0 VDC | 0 VDC |
| 1781195215 | 527 Count | 793 Count | 447 Count | 0 VDC | 0 VDC |
| 1781194747 | 528 Count | 793 Count | 447 Count | 0 VDC | 0 VDC |
| 1781194700 | 527 Count | 793 Count | 447 Count | 0 VDC | 0 VDC |
| 1781193418 | 526 Count | 793 Count | 447 Count | 0 VDC | 0 VDC |
| 1781191614 | 483 Count | 730 Count | 411 Count | 0 VDC | 0 VDC |
| 1781189810 | 429 Count | 648 Count | 365 Count | 0 VDC | 0 VDC |
| 1781188007 | 379 Count | 564 Count | 322 Count | 0 VDC | 0 VDC |
| 1781186203 | 337 Count | 507 Count | 287 Count | 0 VDC | 0 VDC |
| 1780954439 | 336 Count | 507 Count | 287 Count | 0 VDC | 0 VDC |
| 1780952630 | 291 Count | 446 Count | 250 Count | 0 VDC | 0 VDC |
| 1780950826 | 240 Count | 373 Count | 205 Count | 0 VDC | 0 VDC |
| 1780949022 | 191 Count | 300 Count | 162 Count | 0 VDC | 0 VDC |
| 1780947219 | 140 Count | 226 Count | 118 Count | 0 VDC | 0 VDC |
| 1780945415 | 97 Count | 157 Count | 82 Count | 0 VDC | 0 VDC |
| 1780943611 | 48 Count | 81 Count | 40 Count | 0 VDC | 0 VDC |
| 1780941807 | 1 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)