This is the latest recevied telemetry packets stored in our database for station/object HB4FV-24. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792264965 | 875 Count | 545 Count | 545 Count | 0 VDC | 0 VDC |
| 1792263162 | 872 Count | 543 Count | 543 Count | 0 VDC | 0 VDC |
| 1792261359 | 869 Count | 541 Count | 541 Count | 0 VDC | 0 VDC |
| 1792259556 | 866 Count | 539 Count | 539 Count | 0 VDC | 0 VDC |
| 1792257753 | 863 Count | 537 Count | 537 Count | 0 VDC | 0 VDC |
| 1792255950 | 860 Count | 535 Count | 535 Count | 0 VDC | 0 VDC |
| 1792254146 | 857 Count | 533 Count | 533 Count | 0 VDC | 0 VDC |
| 1792252343 | 853 Count | 530 Count | 530 Count | 0 VDC | 0 VDC |
| 1792250540 | 850 Count | 528 Count | 528 Count | 0 VDC | 0 VDC |
| 1792248882 | 843 Count | 526 Count | 526 Count | 0 VDC | 0 VDC |
| 1792247079 | 840 Count | 524 Count | 524 Count | 0 VDC | 0 VDC |
| 1792245276 | 837 Count | 522 Count | 522 Count | 0 VDC | 0 VDC |
| 1792243473 | 834 Count | 520 Count | 520 Count | 0 VDC | 0 VDC |
| 1792241670 | 832 Count | 519 Count | 519 Count | 0 VDC | 0 VDC |
| 1792239867 | 829 Count | 517 Count | 517 Count | 0 VDC | 0 VDC |
| 1792238064 | 827 Count | 516 Count | 516 Count | 0 VDC | 0 VDC |
| 1792236261 | 824 Count | 514 Count | 514 Count | 0 VDC | 0 VDC |
| 1792234458 | 821 Count | 512 Count | 512 Count | 0 VDC | 0 VDC |
| 1792232655 | 818 Count | 510 Count | 510 Count | 0 VDC | 0 VDC |
| 1792230852 | 815 Count | 508 Count | 508 Count | 0 VDC | 0 VDC |
| 1792229049 | 812 Count | 506 Count | 506 Count | 0 VDC | 0 VDC |
| 1792227246 | 809 Count | 504 Count | 504 Count | 0 VDC | 0 VDC |
| 1792225442 | 807 Count | 503 Count | 503 Count | 0 VDC | 0 VDC |
| 1792223639 | 805 Count | 502 Count | 502 Count | 0 VDC | 0 VDC |
| 1792221836 | 802 Count | 500 Count | 500 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)