This is the latest recevied telemetry packets stored in our database for station/object SP8G. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791174482 | 0 Count | 835 Count | 552 Count | 0.28 VDC | 0.08 VDC |
| 1791173881 | 0 Count | 830 Count | 549 Count | 0.28 VDC | 0.08 VDC |
| 1791173280 | 0 Count | 827 Count | 547 Count | 0.28 VDC | 0.08 VDC |
| 1791172679 | 0 Count | 823 Count | 544 Count | 0.28 VDC | 0.08 VDC |
| 1791172078 | 0 Count | 818 Count | 541 Count | 0.28 VDC | 0.08 VDC |
| 1791171477 | 0 Count | 815 Count | 539 Count | 0.28 VDC | 0.08 VDC |
| 1791170876 | 0 Count | 811 Count | 536 Count | 0.28 VDC | 0.08 VDC |
| 1791170276 | 0 Count | 806 Count | 533 Count | 0.28 VDC | 0.08 VDC |
| 1791169675 | 0 Count | 803 Count | 531 Count | 0.28 VDC | 0.08 VDC |
| 1791169074 | 0 Count | 799 Count | 528 Count | 0.28 VDC | 0.08 VDC |
| 1791168473 | 0 Count | 793 Count | 525 Count | 0.28 VDC | 0.08 VDC |
| 1791167873 | 0 Count | 790 Count | 523 Count | 0.28 VDC | 0.08 VDC |
| 1791167272 | 0 Count | 786 Count | 520 Count | 0.28 VDC | 0.08 VDC |
| 1791166671 | 0 Count | 781 Count | 517 Count | 0.28 VDC | 0.08 VDC |
| 1791166070 | 0 Count | 770 Count | 511 Count | 0.28 VDC | 0.08 VDC |
| 1791165470 | 0 Count | 766 Count | 508 Count | 0.28 VDC | 0.08 VDC |
| 1791164869 | 0 Count | 761 Count | 505 Count | 0.28 VDC | 0.08 VDC |
| 1791164268 | 0 Count | 759 Count | 504 Count | 0.28 VDC | 0.08 VDC |
| 1791163667 | 0 Count | 755 Count | 501 Count | 0.28 VDC | 0.08 VDC |
| 1791163067 | 0 Count | 749 Count | 498 Count | 0.28 VDC | 0.08 VDC |
| 1791162466 | 0 Count | 746 Count | 496 Count | 0.28 VDC | 0.08 VDC |
| 1791161865 | 0 Count | 742 Count | 493 Count | 0.28 VDC | 0.08 VDC |
| 1791161264 | 0 Count | 738 Count | 490 Count | 0.28 VDC | 0.08 VDC |
| 1791160664 | 0 Count | 735 Count | 488 Count | 0.28 VDC | 0.08 VDC |
| 1791160063 | 0 Count | 732 Count | 485 Count | 0.28 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)