This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788992326 | 322 Count | 1009 Count | 204 Count | 0 VDC | 0 VDC |
| 1788992026 | 315 Count | 988 Count | 198 Count | 0 VDC | 0 VDC |
| 1788991725 | 314 Count | 985 Count | 198 Count | 0 VDC | 0 VDC |
| 1788991424 | 312 Count | 972 Count | 197 Count | 0 VDC | 0 VDC |
| 1788991124 | 307 Count | 960 Count | 193 Count | 0 VDC | 0 VDC |
| 1788990823 | 305 Count | 954 Count | 192 Count | 0 VDC | 0 VDC |
| 1788990523 | 302 Count | 944 Count | 190 Count | 0 VDC | 0 VDC |
| 1788990222 | 299 Count | 931 Count | 188 Count | 0 VDC | 0 VDC |
| 1788989922 | 298 Count | 918 Count | 188 Count | 0 VDC | 0 VDC |
| 1788989621 | 296 Count | 914 Count | 187 Count | 0 VDC | 0 VDC |
| 1788989320 | 292 Count | 904 Count | 184 Count | 0 VDC | 0 VDC |
| 1788989020 | 290 Count | 897 Count | 183 Count | 0 VDC | 0 VDC |
| 1788988719 | 287 Count | 886 Count | 181 Count | 0 VDC | 0 VDC |
| 1788988418 | 283 Count | 858 Count | 178 Count | 0 VDC | 0 VDC |
| 1788988118 | 282 Count | 852 Count | 178 Count | 0 VDC | 0 VDC |
| 1788987817 | 280 Count | 848 Count | 177 Count | 0 VDC | 0 VDC |
| 1788987517 | 276 Count | 829 Count | 174 Count | 0 VDC | 0 VDC |
| 1788987216 | 274 Count | 820 Count | 173 Count | 0 VDC | 0 VDC |
| 1788986915 | 270 Count | 799 Count | 170 Count | 0 VDC | 0 VDC |
| 1788986614 | 265 Count | 781 Count | 166 Count | 0 VDC | 0 VDC |
| 1788986314 | 264 Count | 774 Count | 166 Count | 0 VDC | 0 VDC |
| 1788986013 | 262 Count | 768 Count | 165 Count | 0 VDC | 0 VDC |
| 1788985712 | 258 Count | 755 Count | 162 Count | 0 VDC | 0 VDC |
| 1788985412 | 256 Count | 740 Count | 161 Count | 0 VDC | 0 VDC |
| 1788985114 | 253 Count | 727 Count | 159 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)