This is the latest recevied telemetry packets stored in our database for station/object SP3DVO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770091497 | 421 | 0 | 0 | 0 | 0 |
| 1770089697 | 420 | 0 | 0 | 0 | 0 |
| 1770088796 | 421 | 0 | 0 | 0 | 0 |
| 1770087896 | 420 | 0 | 0 | 0 | 0 |
| 1770086996 | 423 | 0 | 0 | 0 | 0 |
| 1770086096 | 421 | 0 | 0 | 0 | 0 |
| 1770085196 | 421 | 0 | 0 | 0 | 0 |
| 1770084296 | 420 | 0 | 0 | 0 | 0 |
| 1770083396 | 421 | 0 | 0 | 0 | 0 |
| 1770082496 | 421 | 0 | 0 | 0 | 0 |
| 1770081596 | 421 | 0 | 0 | 0 | 0 |
| 1770080695 | 421 | 0 | 0 | 0 | 0 |
| 1770079795 | 421 | 0 | 0 | 0 | 0 |
| 1770078895 | 421 | 0 | 0 | 0 | 0 |
| 1770077995 | 421 | 0 | 0 | 0 | 0 |
| 1770077095 | 421 | 0 | 0 | 0 | 0 |
| 1770076195 | 421 | 0 | 0 | 0 | 0 |
| 1770075295 | 421 | 0 | 0 | 0 | 0 |
| 1770074397 | 421 | 0 | 0 | 0 | 0 |
| 1770073495 | 421 | 0 | 0 | 0 | 0 |
| 1770072595 | 421 | 0 | 0 | 0 | 0 |
| 1770071695 | 421 | 0 | 0 | 0 | 0 |
| 1770070794 | 421 | 0 | 0 | 0 | 0 |
| 1770069894 | 421 | 0 | 0 | 0 | 0 |
| 1770068994 | 422 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)