This is the latest recevied telemetry packets stored in our database for station/object SV1DZL-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774447452 | 402 Count | 973 Count | 328 Count | 0 VDC | 0 VDC |
| 1774445649 | 396 Count | 960 Count | 323 Count | 0 VDC | 0 VDC |
| 1774443845 | 389 Count | 937 Count | 317 Count | 0 VDC | 0 VDC |
| 1774442049 | 384 Count | 926 Count | 313 Count | 0 VDC | 0 VDC |
| 1774440238 | 376 Count | 899 Count | 306 Count | 0 VDC | 0 VDC |
| 1774438439 | 366 Count | 877 Count | 297 Count | 0 VDC | 0 VDC |
| 1774434866 | 337 Count | 825 Count | 276 Count | 0 VDC | 0 VDC |
| 1774433062 | 329 Count | 799 Count | 270 Count | 0 VDC | 0 VDC |
| 1774431258 | 312 Count | 768 Count | 255 Count | 0 VDC | 0 VDC |
| 1774429455 | 298 Count | 726 Count | 242 Count | 0 VDC | 0 VDC |
| 1774427657 | 280 Count | 668 Count | 229 Count | 0 VDC | 0 VDC |
| 1774425847 | 271 Count | 635 Count | 222 Count | 0 VDC | 0 VDC |
| 1774424043 | 260 Count | 611 Count | 212 Count | 0 VDC | 0 VDC |
| 1774422239 | 246 Count | 582 Count | 200 Count | 0 VDC | 0 VDC |
| 1774420440 | 231 Count | 547 Count | 189 Count | 0 VDC | 0 VDC |
| 1774418632 | 222 Count | 524 Count | 181 Count | 0 VDC | 0 VDC |
| 1774416835 | 214 Count | 498 Count | 174 Count | 0 VDC | 0 VDC |
| 1774415024 | 205 Count | 480 Count | 166 Count | 0 VDC | 0 VDC |
| 1774411462 | 186 Count | 436 Count | 153 Count | 0 VDC | 0 VDC |
| 1774409658 | 177 Count | 414 Count | 145 Count | 0 VDC | 0 VDC |
| 1774407854 | 170 Count | 387 Count | 139 Count | 0 VDC | 0 VDC |
| 1774406057 | 159 Count | 364 Count | 130 Count | 0 VDC | 0 VDC |
| 1774404247 | 149 Count | 332 Count | 122 Count | 0 VDC | 0 VDC |
| 1774402448 | 137 Count | 307 Count | 112 Count | 0 VDC | 0 VDC |
| 1774400640 | 123 Count | 269 Count | 100 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)