This is the latest recevied telemetry packets stored in our database for station/object SQ5LTL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793633653 | 422 Count | 979 Count | 49 Count | 0 VDC | 0 VDC |
| 1793631853 | 421 Count | 977 Count | 49 Count | 0 VDC | 0 VDC |
| 1793630054 | 420 Count | 975 Count | 49 Count | 0 VDC | 0 VDC |
| 1793628253 | 419 Count | 973 Count | 49 Count | 0 VDC | 0 VDC |
| 1793626453 | 418 Count | 971 Count | 49 Count | 0 VDC | 0 VDC |
| 1793624652 | 417 Count | 969 Count | 49 Count | 0 VDC | 0 VDC |
| 1793622854 | 416 Count | 967 Count | 49 Count | 0 VDC | 0 VDC |
| 1793621053 | 415 Count | 965 Count | 49 Count | 0 VDC | 0 VDC |
| 1793619253 | 414 Count | 963 Count | 49 Count | 0 VDC | 0 VDC |
| 1793617452 | 413 Count | 958 Count | 49 Count | 0 VDC | 0 VDC |
| 1793615654 | 412 Count | 955 Count | 49 Count | 0 VDC | 0 VDC |
| 1793613854 | 411 Count | 953 Count | 49 Count | 0 VDC | 0 VDC |
| 1793608454 | 408 Count | 947 Count | 49 Count | 0 VDC | 0 VDC |
| 1793606652 | 407 Count | 945 Count | 49 Count | 0 VDC | 0 VDC |
| 1793601253 | 404 Count | 939 Count | 49 Count | 0 VDC | 0 VDC |
| 1793599452 | 403 Count | 937 Count | 49 Count | 0 VDC | 0 VDC |
| 1793597653 | 402 Count | 936 Count | 49 Count | 0 VDC | 0 VDC |
| 1793595851 | 395 Count | 919 Count | 43 Count | 0 VDC | 0 VDC |
| 1793594051 | 394 Count | 917 Count | 43 Count | 0 VDC | 0 VDC |
| 1793590451 | 392 Count | 913 Count | 43 Count | 0 VDC | 0 VDC |
| 1793588651 | 391 Count | 911 Count | 43 Count | 0 VDC | 0 VDC |
| 1793585050 | 389 Count | 907 Count | 43 Count | 0 VDC | 0 VDC |
| 1793583252 | 388 Count | 905 Count | 43 Count | 0 VDC | 0 VDC |
| 1793581452 | 387 Count | 903 Count | 43 Count | 0 VDC | 0 VDC |
| 1793579652 | 386 Count | 901 Count | 43 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)