This is the latest recevied telemetry packets stored in our database for station/object SR2JP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762083717 | 415 Count | 543 Count | 12 Count | 0 VDC | 0 VDC |
| 1762082284 | 411 Count | 543 Count | 12 Count | 0 VDC | 0 VDC |
| 1762080604 | 410 Count | 543 Count | 12 Count | 0 VDC | 0 VDC |
| 1762078923 | 409 Count | 543 Count | 12 Count | 0 VDC | 0 VDC |
| 1762077242 | 408 Count | 543 Count | 12 Count | 0 VDC | 0 VDC |
| 1762075561 | 405 Count | 541 Count | 10 Count | 0 VDC | 0 VDC |
| 1762073881 | 404 Count | 541 Count | 10 Count | 0 VDC | 0 VDC |
| 1762072200 | 403 Count | 541 Count | 10 Count | 0 VDC | 0 VDC |
| 1762070519 | 402 Count | 541 Count | 10 Count | 0 VDC | 0 VDC |
| 1762068838 | 401 Count | 541 Count | 10 Count | 0 VDC | 0 VDC |
| 1762067157 | 400 Count | 538 Count | 10 Count | 0 VDC | 0 VDC |
| 1762065477 | 399 Count | 535 Count | 10 Count | 0 VDC | 0 VDC |
| 1762063796 | 398 Count | 532 Count | 10 Count | 0 VDC | 0 VDC |
| 1762062115 | 396 Count | 529 Count | 10 Count | 0 VDC | 0 VDC |
| 1762060683 | 392 Count | 528 Count | 10 Count | 0 VDC | 0 VDC |
| 1762059003 | 391 Count | 525 Count | 10 Count | 0 VDC | 0 VDC |
| 1762057322 | 390 Count | 522 Count | 10 Count | 0 VDC | 0 VDC |
| 1762055641 | 389 Count | 519 Count | 10 Count | 0 VDC | 0 VDC |
| 1762053961 | 388 Count | 516 Count | 10 Count | 0 VDC | 0 VDC |
| 1762052280 | 387 Count | 513 Count | 10 Count | 0 VDC | 0 VDC |
| 1762050599 | 386 Count | 511 Count | 10 Count | 0 VDC | 0 VDC |
| 1762048918 | 385 Count | 502 Count | 10 Count | 0 VDC | 0 VDC |
| 1762047237 | 384 Count | 499 Count | 10 Count | 0 VDC | 0 VDC |
| 1762045557 | 383 Count | 497 Count | 10 Count | 0 VDC | 0 VDC |
| 1762043876 | 382 Count | 494 Count | 10 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)