This is the latest recevied telemetry packets stored in our database for station/object GM5JPB-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768481115 | 4.18 | 0.7 | 0 | 0 | 0 |
| 1768480215 | 4.18 | 0.7 | 0 | 0 | 0 |
| 1768479314 | 4.18 | 0.66 | 0 | 0 | 0 |
| 1768478415 | 4.18 | 0.68 | 0 | 0 | 0 |
| 1768477514 | 4.18 | 0.66 | 0 | 0 | 0 |
| 1768476615 | 4.19 | 0.68 | 0 | 0 | 0 |
| 1768475714 | 4.21 | 0.66 | 0 | 0 | 0 |
| 1768473893 | 4.19 | 0.66 | 0 | 0 | 0 |
| 1768473017 | 4.18 | 0.66 | 0 | 0 | 0 |
| 1768472117 | 4.18 | 0.68 | 0 | 0 | 0 |
| 1768471217 | 4.17 | 0.68 | 0 | 0 | 0 |
| 1768470316 | 4.16 | 0.68 | 0 | 0 | 0 |
| 1768468516 | 4.15 | 0.66 | 0 | 0 | 0 |
| 1768467616 | 4.14 | 0.68 | 0 | 0 | 0 |
| 1768466716 | 4.13 | 0.66 | 0 | 0 | 0 |
| 1768465815 | 4.12 | 0.66 | 0 | 0 | 0 |
| 1768464915 | 4.08 | 0.66 | 0 | 0 | 0 |
| 1768464015 | 4.05 | 0.68 | 0 | 0 | 0 |
| 1768463115 | 4.02 | 0.68 | 0 | 0 | 0 |
| 1768462215 | 3.99 | 0.66 | 0 | 0 | 0 |
| 1768461315 | 3.94 | 0.68 | 0 | 0 | 0 |
| 1768460414 | 3.9 | 0.66 | 0 | 0 | 0 |
| 1768459514 | 3.85 | 0.68 | 0 | 0 | 0 |
| 1768458615 | 3.81 | 0.68 | 0 | 0 | 0 |
| 1768457714 | 3.79 | 0.68 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)