This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768188835 | 61 Count | 906 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1768187032 | 60 Count | 892 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1768185229 | 59 Count | 877 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1768183427 | 58 Count | 865 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1768181624 | 57 Count | 851 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1768179821 | 56 Count | 836 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1768178050 | 55 Count | 823 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1768176247 | 54 Count | 807 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1768174444 | 53 Count | 792 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1768172642 | 52 Count | 778 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1768170839 | 51 Count | 764 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1768169036 | 50 Count | 749 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1768167233 | 49 Count | 736 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1768165431 | 48 Count | 722 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1768163628 | 47 Count | 711 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1768161825 | 46 Count | 699 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1768160022 | 45 Count | 683 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1768158220 | 44 Count | 672 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1768156451 | 43 Count | 658 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1768154648 | 42 Count | 645 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1768152845 | 41 Count | 629 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1768151043 | 40 Count | 613 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1768149240 | 39 Count | 597 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1768147437 | 38 Count | 583 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1768145634 | 37 Count | 570 Count | 0 Count | 4.29 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)