This is the latest recevied telemetry packets stored in our database for station/object F5ZMX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774389462 | 431 Count | 916 Count | 359 Count | 0 VDC | 0 VDC |
| 1774388558 | 419 Count | 894 Count | 348 Count | 0 VDC | 0 VDC |
| 1774387655 | 407 Count | 874 Count | 337 Count | 0 VDC | 0 VDC |
| 1774386751 | 394 Count | 857 Count | 325 Count | 0 VDC | 0 VDC |
| 1774385848 | 384 Count | 835 Count | 316 Count | 0 VDC | 0 VDC |
| 1774384944 | 372 Count | 817 Count | 305 Count | 0 VDC | 0 VDC |
| 1774384041 | 359 Count | 797 Count | 293 Count | 0 VDC | 0 VDC |
| 1774383137 | 348 Count | 775 Count | 283 Count | 0 VDC | 0 VDC |
| 1774382234 | 336 Count | 756 Count | 272 Count | 0 VDC | 0 VDC |
| 1774381330 | 323 Count | 736 Count | 260 Count | 0 VDC | 0 VDC |
| 1774380427 | 311 Count | 718 Count | 249 Count | 0 VDC | 0 VDC |
| 1774379869 | 310 Count | 718 Count | 249 Count | 0 VDC | 0 VDC |
| 1774379052 | 290 Count | 684 Count | 230 Count | 0 VDC | 0 VDC |
| 1774378148 | 282 Count | 671 Count | 223 Count | 0 VDC | 0 VDC |
| 1774377244 | 281 Count | 671 Count | 223 Count | 0 VDC | 0 VDC |
| 1774376341 | 274 Count | 659 Count | 217 Count | 0 VDC | 0 VDC |
| 1774375437 | 269 Count | 649 Count | 213 Count | 0 VDC | 0 VDC |
| 1774374534 | 268 Count | 641 Count | 213 Count | 0 VDC | 0 VDC |
| 1774373630 | 263 Count | 634 Count | 209 Count | 0 VDC | 0 VDC |
| 1774372727 | 256 Count | 619 Count | 203 Count | 0 VDC | 0 VDC |
| 1774371823 | 235 Count | 594 Count | 191 Count | 0 VDC | 0 VDC |
| 1774370920 | 227 Count | 554 Count | 184 Count | 0 VDC | 0 VDC |
| 1774370016 | 215 Count | 523 Count | 173 Count | 0 VDC | 0 VDC |
| 1774369113 | 191 Count | 481 Count | 160 Count | 0 VDC | 0 VDC |
| 1774368209 | 177 Count | 449 Count | 147 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)