This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1762182798 | 12 | 778 C | 414 V | 52 M | 0 |
| 1762174318 | 12 | 740 C | 415 V | 51 M | 0 |
| 1762172562 | 12 | 738 C | 414 V | 51 M | 0 |
| 1762169560 | 12 | 731 C | 416 V | 52 M | 0 |
| 1762166559 | 12 | 733 C | 416 V | 52 M | 0 |
| 1762163556 | 12 | 736 C | 416 V | 52 M | 0 |
| 1762160551 | 12 | 741 C | 415 V | 51 M | 0 |
| 1762157550 | 12 | 747 C | 416 V | 52 M | 0 |
| 1762154549 | 12 | 751 C | 415 V | 53 M | 0 |
| 1762151549 | 12 | 757 C | 415 V | 52 M | 0 |
| 1762148549 | 12 | 766 C | 415 V | 52 M | 0 |
| 1762145549 | 12 | 773 C | 416 V | 52 M | 0 |
| 1762142549 | 12 | 784 C | 415 V | 52 M | 0 |
| 1762139549 | 12 | 796 C | 415 V | 52 M | 0 |
| 1762136549 | 12 | 809 C | 415 V | 52 M | 0 |
| 1762133546 | 12 | 823 C | 415 V | 52 M | 0 |
| 1762130546 | 12 | 841 C | 415 V | 52 M | 0 |
| 1762127546 | 12 | 854 C | 414 V | 53 M | 0 |
| 1762124828 | 12 | 883 C | 415 V | 52 M | 0 |
| 1762124522 | 12 | 883 C | 414 V | 53 M | 0 |
| 1762124326 | 12 | 875 C | 415 V | 52 M | 0 |
| 1762121562 | 12 | 883 C | 415 V | 54 M | 0 |
| 1762118561 | 12 | 887 C | 414 V | 52 M | 0 |
| 1762115559 | 12 | 888 C | 415 V | 52 M | 0 |
| 1762112559 | 12 | 883 C | 415 V | 52 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 1, 0
Volt: 0, 1, 0
Alt: 0, 1, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)