This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773433290 | 71 Count | 228 Count | 61 Count | 0 VDC | 0 VDC |
| 1773431490 | 63 Count | 211 Count | 54 Count | 0 VDC | 0 VDC |
| 1773429689 | 52 Count | 184 Count | 44 Count | 0 VDC | 0 VDC |
| 1773427888 | 43 Count | 153 Count | 36 Count | 0 VDC | 0 VDC |
| 1773426087 | 27 Count | 94 Count | 21 Count | 0 VDC | 0 VDC |
| 1773424287 | 13 Count | 46 Count | 8 Count | 0 VDC | 0 VDC |
| 1773422486 | 4 Count | 1 Count | 0 Count | 0 VDC | 0 VDC |
| 1773420692 | 251 Count | 974 Count | 216 Count | 0 VDC | 0 VDC |
| 1773418892 | 240 Count | 934 Count | 206 Count | 0 VDC | 0 VDC |
| 1773417091 | 231 Count | 873 Count | 198 Count | 0 VDC | 0 VDC |
| 1773415290 | 213 Count | 829 Count | 181 Count | 0 VDC | 0 VDC |
| 1773413489 | 202 Count | 788 Count | 176 Count | 0 VDC | 0 VDC |
| 1773411689 | 193 Count | 754 Count | 168 Count | 0 VDC | 0 VDC |
| 1773409888 | 184 Count | 714 Count | 160 Count | 0 VDC | 0 VDC |
| 1773408087 | 156 Count | 662 Count | 138 Count | 0 VDC | 0 VDC |
| 1773406286 | 145 Count | 634 Count | 128 Count | 0 VDC | 0 VDC |
| 1773404486 | 132 Count | 600 Count | 116 Count | 0 VDC | 0 VDC |
| 1773402685 | 123 Count | 577 Count | 108 Count | 0 VDC | 0 VDC |
| 1773400884 | 110 Count | 529 Count | 96 Count | 0 VDC | 0 VDC |
| 1773399091 | 97 Count | 481 Count | 88 Count | 0 VDC | 0 VDC |
| 1773397291 | 92 Count | 434 Count | 84 Count | 0 VDC | 0 VDC |
| 1773395490 | 74 Count | 372 Count | 67 Count | 0 VDC | 0 VDC |
| 1773393689 | 60 Count | 289 Count | 54 Count | 0 VDC | 0 VDC |
| 1773391888 | 46 Count | 241 Count | 41 Count | 0 VDC | 0 VDC |
| 1773390088 | 40 Count | 207 Count | 36 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)