This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771267520 | 0 Count | 379 Count | 0 Count | 0 VDC | 0 VDC |
| 1771266620 | 0 Count | 322 Count | 0 Count | 0 VDC | 0 VDC |
| 1771265719 | 0 Count | 263 Count | 0 Count | 0 VDC | 0 VDC |
| 1771264820 | 0 Count | 199 Count | 0 Count | 0 VDC | 0 VDC |
| 1771263919 | 0 Count | 140 Count | 0 Count | 0 VDC | 0 VDC |
| 1771263019 | 0 Count | 104 Count | 0 Count | 0 VDC | 0 VDC |
| 1771262119 | 0 Count | 57 Count | 0 Count | 0 VDC | 0 VDC |
| 1771261219 | 0 Count | 1035 Count | 0 Count | 0 VDC | 0 VDC |
| 1771260319 | 0 Count | 975 Count | 0 Count | 0 VDC | 0 VDC |
| 1771259419 | 0 Count | 902 Count | 0 Count | 0 VDC | 0 VDC |
| 1771258521 | 0 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1771257620 | 0 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1771256720 | 0 Count | 687 Count | 0 Count | 0 VDC | 0 VDC |
| 1771255820 | 0 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1771254920 | 0 Count | 573 Count | 0 Count | 0 VDC | 0 VDC |
| 1771254020 | 0 Count | 506 Count | 0 Count | 0 VDC | 0 VDC |
| 1771253119 | 0 Count | 443 Count | 0 Count | 0 VDC | 0 VDC |
| 1771252219 | 0 Count | 376 Count | 0 Count | 0 VDC | 0 VDC |
| 1771251319 | 0 Count | 319 Count | 0 Count | 0 VDC | 0 VDC |
| 1771250419 | 0 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1771249519 | 0 Count | 237 Count | 0 Count | 0 VDC | 0 VDC |
| 1771248619 | 0 Count | 187 Count | 0 Count | 0 VDC | 0 VDC |
| 1771247719 | 0 Count | 139 Count | 0 Count | 0 VDC | 0 VDC |
| 1771246819 | 0 Count | 76 Count | 0 Count | 0 VDC | 0 VDC |
| 1771245918 | 0 Count | 1046 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)