This is the latest recevied telemetry packets stored in our database for station/object BI1OHC-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T* | H* | P* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768045721 | 4 C | 34 %RH | 1016 hPa | 0 | 0 |
| 1768045690 | 5 C | 34 %RH | 1016 hPa | 0 | 0 |
| 1768045504 | 7 C | 34 %RH | 1016 hPa | 0 | 0 |
| 1768045423 | 8 C | 37 %RH | 1015 hPa | 0 | 0 |
| 1768045295 | 9 C | 35 %RH | 1014 hPa | 0 | 0 |
| 1768045264 | 9 C | 32 %RH | 1014 hPa | 0 | 0 |
| 1768045065 | 10 C | 38 %RH | 1013 hPa | 0 | 0 |
| 1768044980 | 11 C | 50 %RH | 1012 hPa | 0 | 0 |
| 1768044870 | 11 C | 36 %RH | 1012 hPa | 0 | 0 |
| 1768044381 | 5 C | 67 %RH | 1011 hPa | 0 | 0 |
| 1768043685 | 7 C | 39 %RH | 1011 hPa | 0 | 0 |
| 1768043456 | 9 C | 36 %RH | 1011 hPa | 0 | 0 |
| 1768043359 | 14 C | 33 %RH | 1011 hPa | 0 | 0 |
| 1768043310 | 14 C | 33 %RH | 1011 hPa | 0 | 0 |
| 1768043042 | 21 C | 28 %RH | 1010 hPa | 0 | 0 |
| 1768041799 | 13 C | 58 %RH | 1010 hPa | 0 | 0 |
| 1768041632 | 17 C | 34 %RH | 1010 hPa | 0 | 0 |
*Used Equation Coefficients:
T: 0, 1, 0
H: 0, 1, 0
P: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)