This is the latest recevied telemetry packets stored in our database for station/object DG6DXG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757316275 | 23 C | 30.96 % | 1021 hPa | 0 | 0 |
| 1757316200 | 22.9 C | 31.06 % | 1021.75 hPa | 0 | 0 |
| 1757316165 | 22.7 C | 30.88 % | 1021.75 hPa | 0 | 0 |
| 1757316086 | 22.5 C | 31.5 % | 1022 hPa | 0 | 0 |
| 1757315941 | 22.1 C | 33.21 % | 1021.5 hPa | 0 | 0 |
| 1757315865 | 21.8 C | 33.22 % | 1021.25 hPa | 0 | 0 |
| 1757315802 | 21.6 C | 34.17 % | 1021.25 hPa | 0 | 0 |
| 1757315785 | 21.4 C | 34.8 % | 1021.75 hPa | 0 | 0 |
| 1757315745 | 21.4 C | 34.8 % | 1021.75 hPa | 0 | 0 |
| 1757315718 | 21.3 C | 38.11 % | 1021.5 hPa | 0 | 0 |
| 1757315700 | 21.3 C | 38.11 % | 1021.38 hPa | 0 | 0 |
| 1757315682 | 21.3 C | 38.11 % | 1021.38 hPa | 0 | 0 |
| 1757315345 | 22.6 C | 35.22 % | 1021.13 hPa | 0 | 0 |
| 1757308368 | 13.2 C | 46.27 % | 1023.75 hPa | 0 | 0 |
| 1757269583 | 23.9 C | 31.62 % | 1023 hPa | 0 | 0 |
| 1757269559 | 23.9 C | 31.62 % | 1022.5 hPa | 0 | 0 |
| 1757269537 | 23.9 C | 31.62 % | 1023.75 hPa | 0 | 0 |
| 1757269520 | 23.7 C | 31.95 % | 1025.25 hPa | 0 | 0 |
| 1757269504 | 23.7 C | 31.95 % | 1024.63 hPa | 0 | 0 |
| 1757269487 | 23.7 C | 31.95 % | 1023 hPa | 0 | 0 |
| 1757269446 | 23.5 C | 32.6 % | 1021.88 hPa | 0 | 0 |
| 1757269428 | 23.5 C | 32.6 % | 1021.88 hPa | 0 | 0 |
| 1757269403 | 23.2 C | 32.63 % | 1022.38 hPa | 0 | 0 |
| 1757269386 | 23.2 C | 32.63 % | 1022.13 hPa | 0 | 0 |
| 1757233320 | 16.1 C | 39.66 % | 1024.75 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)