This is the latest recevied telemetry packets stored in our database for station/object IR9W-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764287903 | 526 Count | 668 Count | 436 Count | 4.2 VDC | 0 VDC |
| 1764287600 | 523 Count | 665 Count | 434 Count | 4.16 VDC | 0 VDC |
| 1764287296 | 514 Count | 655 Count | 426 Count | 4.14 VDC | 0 VDC |
| 1764286993 | 509 Count | 650 Count | 422 Count | 4.13 VDC | 0 VDC |
| 1764286689 | 505 Count | 640 Count | 419 Count | 4.18 VDC | 0 VDC |
| 1764286385 | 498 Count | 629 Count | 413 Count | 4.16 VDC | 0 VDC |
| 1764286082 | 490 Count | 619 Count | 406 Count | 4.14 VDC | 0 VDC |
| 1764285776 | 484 Count | 612 Count | 401 Count | 4.21 VDC | 0 VDC |
| 1764285472 | 477 Count | 605 Count | 395 Count | 4.18 VDC | 0 VDC |
| 1764285168 | 470 Count | 597 Count | 389 Count | 4.17 VDC | 0 VDC |
| 1764284865 | 463 Count | 589 Count | 383 Count | 4.14 VDC | 0 VDC |
| 1764284561 | 457 Count | 582 Count | 378 Count | 4.18 VDC | 0 VDC |
| 1764284257 | 450 Count | 571 Count | 372 Count | 4.2 VDC | 0 VDC |
| 1764283954 | 443 Count | 563 Count | 366 Count | 4.16 VDC | 0 VDC |
| 1764283646 | 435 Count | 553 Count | 359 Count | 4.14 VDC | 0 VDC |
| 1764283343 | 431 Count | 549 Count | 356 Count | 4.12 VDC | 0 VDC |
| 1764283040 | 426 Count | 541 Count | 352 Count | 4.15 VDC | 0 VDC |
| 1764282736 | 415 Count | 528 Count | 342 Count | 4.17 VDC | 0 VDC |
| 1764282427 | 409 Count | 521 Count | 337 Count | 4.14 VDC | 0 VDC |
| 1764282123 | 406 Count | 516 Count | 335 Count | 4.12 VDC | 0 VDC |
| 1764281820 | 399 Count | 507 Count | 329 Count | 4.21 VDC | 0 VDC |
| 1764281517 | 392 Count | 500 Count | 323 Count | 4.15 VDC | 0 VDC |
| 1764281213 | 384 Count | 491 Count | 316 Count | 4.12 VDC | 0 VDC |
| 1764280910 | 380 Count | 485 Count | 313 Count | 4.16 VDC | 0 VDC |
| 1764280606 | 378 Count | 481 Count | 312 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)