This is the latest recevied telemetry packets stored in our database for station/object SQ3MVA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789682297 | 299 Count | 210 Count | 182 Count | 4.26 VDC | 0.16 VDC |
| 1789681396 | 297 Count | 209 Count | 181 Count | 4.21 VDC | 0.16 VDC |
| 1789680496 | 295 Count | 208 Count | 180 Count | 4.25 VDC | 0.16 VDC |
| 1789679595 | 293 Count | 207 Count | 179 Count | 4.25 VDC | 0.16 VDC |
| 1789678694 | 289 Count | 204 Count | 176 Count | 4.26 VDC | 0.16 VDC |
| 1789677793 | 287 Count | 203 Count | 175 Count | 4.26 VDC | 0.16 VDC |
| 1789676892 | 285 Count | 202 Count | 174 Count | 4.27 VDC | 0.16 VDC |
| 1789675992 | 278 Count | 196 Count | 168 Count | 4.28 VDC | 0.16 VDC |
| 1789675091 | 276 Count | 195 Count | 167 Count | 4.25 VDC | 0.14 VDC |
| 1789674190 | 273 Count | 193 Count | 165 Count | 4.23 VDC | 0.16 VDC |
| 1789673289 | 270 Count | 191 Count | 163 Count | 4.25 VDC | 0.14 VDC |
| 1789672388 | 262 Count | 184 Count | 156 Count | 4.25 VDC | 0.16 VDC |
| 1789671488 | 259 Count | 182 Count | 154 Count | 4.24 VDC | 0.16 VDC |
| 1789670587 | 255 Count | 179 Count | 151 Count | 4.25 VDC | 0.16 VDC |
| 1789669686 | 253 Count | 178 Count | 150 Count | 4.22 VDC | 0.14 VDC |
| 1789669290 | 252 Count | 178 Count | 150 Count | 4.22 VDC | 0.14 VDC |
| 1789669236 | 251 Count | 178 Count | 150 Count | 4.25 VDC | 0.16 VDC |
| 1789668335 | 249 Count | 177 Count | 149 Count | 4.23 VDC | 0.14 VDC |
| 1789667434 | 245 Count | 174 Count | 146 Count | 4.26 VDC | 0.14 VDC |
| 1789666534 | 243 Count | 173 Count | 145 Count | 4.26 VDC | 0.16 VDC |
| 1789665633 | 237 Count | 168 Count | 140 Count | 4.27 VDC | 0.16 VDC |
| 1789664732 | 233 Count | 165 Count | 137 Count | 4.21 VDC | 0.16 VDC |
| 1789663831 | 230 Count | 163 Count | 135 Count | 4.25 VDC | 0.16 VDC |
| 1789662930 | 222 Count | 156 Count | 128 Count | 4.23 VDC | 0.16 VDC |
| 1789662030 | 216 Count | 151 Count | 123 Count | 4.27 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)