This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764258275 | 146 Count | 113 Count | 62 Count | 4.2 VDC | 0 VDC |
| 1764257374 | 145 Count | 111 Count | 62 Count | 4.17 VDC | 0 VDC |
| 1764256474 | 143 Count | 110 Count | 61 Count | 4.17 VDC | 0 VDC |
| 1764255573 | 141 Count | 109 Count | 60 Count | 4.18 VDC | 0 VDC |
| 1764254672 | 140 Count | 105 Count | 60 Count | 4.19 VDC | 0 VDC |
| 1764253771 | 139 Count | 91 Count | 60 Count | 4.22 VDC | 0 VDC |
| 1764252869 | 137 Count | 79 Count | 59 Count | 4.2 VDC | 0 VDC |
| 1764251969 | 135 Count | 76 Count | 58 Count | 4.18 VDC | 0 VDC |
| 1764251068 | 133 Count | 75 Count | 57 Count | 4.21 VDC | 0 VDC |
| 1764250167 | 132 Count | 75 Count | 57 Count | 4.2 VDC | 0 VDC |
| 1764249266 | 130 Count | 74 Count | 56 Count | 4.19 VDC | 0 VDC |
| 1764248365 | 128 Count | 73 Count | 55 Count | 4.22 VDC | 0 VDC |
| 1764247464 | 126 Count | 70 Count | 54 Count | 4.21 VDC | 0 VDC |
| 1764246564 | 125 Count | 70 Count | 54 Count | 4.17 VDC | 0 VDC |
| 1764245663 | 124 Count | 70 Count | 54 Count | 4.19 VDC | 0 VDC |
| 1764244762 | 123 Count | 70 Count | 54 Count | 4.17 VDC | 0 VDC |
| 1764243861 | 122 Count | 70 Count | 54 Count | 4.22 VDC | 0 VDC |
| 1764242960 | 120 Count | 69 Count | 53 Count | 4.22 VDC | 0 VDC |
| 1764242059 | 119 Count | 69 Count | 53 Count | 4.18 VDC | 0 VDC |
| 1764241158 | 117 Count | 68 Count | 52 Count | 4.21 VDC | 0 VDC |
| 1764240257 | 115 Count | 67 Count | 51 Count | 4.18 VDC | 0 VDC |
| 1764239357 | 113 Count | 66 Count | 50 Count | 4.2 VDC | 0 VDC |
| 1764238456 | 107 Count | 59 Count | 45 Count | 4.22 VDC | 0 VDC |
| 1764237555 | 104 Count | 55 Count | 43 Count | 4.19 VDC | 0 VDC |
| 1764236654 | 102 Count | 54 Count | 42 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)