This is the latest recevied telemetry packets stored in our database for station/object KH6LOL-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764228567 | 12.25 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764228268 | 12.25 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764227969 | 12.25 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764227670 | 12.25 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764227371 | 12.25 Volts | 80.04 Deg.F | 0 | 0 | 0 |
| 1764227072 | 12.25 Volts | 79.16 Deg.F | 0 | 0 | 0 |
| 1764226773 | 12.25 Volts | 79.16 Deg.F | 0 | 0 | 0 |
| 1764226474 | 12.25 Volts | 79.16 Deg.F | 0 | 0 | 0 |
| 1764226175 | 12.28 Volts | 79.16 Deg.F | 0 | 0 | 0 |
| 1764225876 | 12.28 Volts | 78.28 Deg.F | 0 | 0 | 0 |
| 1764225578 | 12.28 Volts | 77.4 Deg.F | 0 | 0 | 0 |
| 1764225279 | 12.28 Volts | 77.4 Deg.F | 0 | 0 | 0 |
| 1764224980 | 12.28 Volts | 77.4 Deg.F | 0 | 0 | 0 |
| 1764224681 | 12.28 Volts | 78.28 Deg.F | 0 | 0 | 0 |
| 1764224382 | 12.28 Volts | 78.28 Deg.F | 0 | 0 | 0 |
| 1764224083 | 13.16 Volts | 80.04 Deg.F | 0 | 0 | 0 |
| 1764223784 | 13.16 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223762 | 13.19 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223752 | 13.13 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223742 | 13.19 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223726 | 13.16 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223620 | 13.19 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223555 | 13.16 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223515 | 13.16 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1764223373 | 13.1 Volts | 81.79 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)