This is the latest recevied telemetry packets stored in our database for station/object SA2KLM-97. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1764303509 | 4.17 VDC | 22 C | 33.61 % | 989.63 hPa | 0 |
| 1764297129 | 4.19 VDC | 23.1 C | 33.23 % | 993.13 hPa | 0 |
| 1764293557 | 4.08 VDC | 21.9 C | 34.04 % | 996 hPa | 0 |
| 1764284526 | 4.09 VDC | 21.8 C | 34.15 % | 995.75 hPa | 0 |
| 1764276353 | 4.11 VDC | 22 C | 34.24 % | 995.25 hPa | 0 |
| 1764268829 | 4.12 VDC | 21.9 C | 33.57 % | 993.25 hPa | 0 |
| 1764261667 | 4.14 VDC | 22.1 C | 34.06 % | 990.75 hPa | 0 |
| 1764247060 | 4.19 VDC | 23.6 C | 33.77 % | 994.5 hPa | 0 |
| 1764238028 | 4.09 VDC | 21.7 C | 34.4 % | 998 hPa | 0 |
| 1764230613 | 4.1 VDC | 21.6 C | 34.47 % | 996.75 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)