This is the latest recevied telemetry packets stored in our database for station/object IZ3SLY-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1763883690 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763882790 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763881889 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763880989 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763880089 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763879188 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763878288 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763877388 | 0 VDC | 7.68 VDC | 0 | 0 | 0 |
| 1763876488 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763875587 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763874687 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763873786 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763872885 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763871985 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763871085 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763870185 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763869285 | 0 VDC | 6.44 VDC | 0 | 0 | 0 |
| 1763868384 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763867484 | 0 VDC | 6.14 VDC | 0 | 0 | 0 |
| 1763866583 | 0 VDC | 7.52 VDC | 0 | 0 | 0 |
| 1763865683 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763864782 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763863882 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763862982 | 0 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1763862082 | 0 VDC | 7.22 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)