This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764293735 | 997 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764291935 | 996 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764290134 | 995 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764288333 | 994 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764286533 | 993 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764284732 | 992 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764282932 | 991 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764281131 | 990 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764279330 | 989 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764275736 | 983 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764273935 | 982 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764272135 | 981 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764266732 | 978 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764264932 | 977 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764263131 | 976 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764261331 | 975 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764259530 | 974 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764257730 | 973 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764255936 | 968 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764246933 | 963 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764241531 | 960 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764239730 | 959 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764237930 | 958 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764236129 | 957 Count | 271 Count | 195 Count | 0 VDC | 0 VDC |
| 1764234335 | 951 Count | 270 Count | 194 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)