This is the latest recevied telemetry packets stored in our database for station/object VK4XSS-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ign* | speed* | rpm* | gear* | sprt* |
|---|---|---|---|---|---|
| 1762162131 | 0 | 0 | 1028 | 4 | 0 |
| 1762162007 | 3 | 28 | 2068 | 0 | 0 |
| 1762161887 | 3 | 66 | 2092 | 0 | 0 |
| 1762161767 | 3 | 67 | 1055 | 0 | 0 |
| 1762161646 | 3 | 75 | 2162 | 0 | 0 |
| 1762161527 | 3 | 34 | 1448 | 0 | 0 |
| 1762161408 | 3 | 56 | 1673 | 0 | 0 |
| 1762161406 | 3 | 57 | 1540 | 0 | 0 |
| 1762161288 | 3 | 51 | 3267 | 0 | 0 |
| 1762161168 | 3 | 62 | 932 | 0 | 0 |
| 1762161167 | 3 | 61 | 932 | 0 | 0 |
| 1762161048 | 3 | 61 | 2418 | 0 | 0 |
| 1762160927 | 3 | 0 | 637 | 0 | 0 |
| 1762160927 | 3 | 0 | 897 | 0 | 0 |
| 1762160808 | 3 | 54 | 1869 | 0 | 0 |
| 1762160689 | 3 | 56 | 1373 | 0 | 0 |
| 1762160457 | 0 | 0 | 769 | 4 | 0 |
| 1762160215 | 0 | 0 | 769 | 4 | 0 |
| 1762160070 | 3 | 51 | 1365 | 0 | 0 |
| 1762159975 | 3 | 48 | 2088 | 0 | 0 |
| 1762159950 | 3 | 55 | 1501 | 0 | 0 |
| 1762159830 | 3 | 54 | 1464 | 0 | 0 |
| 1762159710 | 3 | 55 | 1922 | 0 | 0 |
| 1762159590 | 3 | 0 | 637 | 0 | 0 |
| 1762159493 | 3 | 42 | 1878 | 0 | 0 |
*Used Equation Coefficients:
ign: 0, 1, 0
speed: 0, 1, 0
rpm: 0, 1, 0
gear: 0, 1, 0
sprt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)