This is the latest recevied telemetry packets stored in our database for station/object SQ8XY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761972918 | 123 Count | 33 Count | 33 Count | 4.33 VDC | 0.14 VDC |
| 1761972615 | 122 Count | 33 Count | 33 Count | 4.3 VDC | 0.14 VDC |
| 1761972312 | 121 Count | 33 Count | 33 Count | 4.27 VDC | 0.14 VDC |
| 1761972009 | 120 Count | 33 Count | 33 Count | 4.3 VDC | 0.14 VDC |
| 1761971706 | 119 Count | 33 Count | 33 Count | 4.29 VDC | 0.14 VDC |
| 1761971403 | 117 Count | 32 Count | 32 Count | 4.31 VDC | 0.14 VDC |
| 1761971101 | 116 Count | 32 Count | 32 Count | 4.29 VDC | 0.14 VDC |
| 1761970798 | 115 Count | 32 Count | 32 Count | 4.27 VDC | 0.14 VDC |
| 1761970495 | 113 Count | 31 Count | 31 Count | 4.33 VDC | 0.14 VDC |
| 1761970192 | 112 Count | 31 Count | 31 Count | 4.28 VDC | 0.14 VDC |
| 1761969890 | 111 Count | 31 Count | 31 Count | 4.27 VDC | 0.14 VDC |
| 1761969587 | 109 Count | 30 Count | 30 Count | 4.35 VDC | 0.14 VDC |
| 1761969283 | 108 Count | 30 Count | 30 Count | 4.31 VDC | 0.14 VDC |
| 1761968981 | 107 Count | 30 Count | 30 Count | 4.27 VDC | 0.14 VDC |
| 1761968678 | 105 Count | 29 Count | 29 Count | 4.28 VDC | 0.14 VDC |
| 1761968375 | 104 Count | 29 Count | 29 Count | 4.29 VDC | 0.14 VDC |
| 1761968072 | 103 Count | 29 Count | 29 Count | 4.29 VDC | 0.14 VDC |
| 1761967769 | 101 Count | 28 Count | 28 Count | 4.26 VDC | 0.14 VDC |
| 1761967467 | 100 Count | 28 Count | 28 Count | 4.27 VDC | 0.14 VDC |
| 1761967163 | 99 Count | 28 Count | 28 Count | 4.33 VDC | 0.14 VDC |
| 1761966861 | 97 Count | 27 Count | 27 Count | 4.27 VDC | 0.14 VDC |
| 1761966558 | 96 Count | 27 Count | 27 Count | 4.3 VDC | 0.14 VDC |
| 1761966255 | 95 Count | 27 Count | 27 Count | 4.33 VDC | 0.14 VDC |
| 1761965952 | 93 Count | 26 Count | 26 Count | 4.27 VDC | 0.14 VDC |
| 1761965649 | 92 Count | 26 Count | 26 Count | 4.34 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)