This is the latest recevied telemetry packets stored in our database for station/object IS0HYQ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761841819 | 10 Pkt/10m | 10 Pkt/10m | 3.43 Volt | 0 | 0 |
| 1761840617 | 11 Pkt/10m | 11 Pkt/10m | 3.43 Volt | 0 | 0 |
| 1761839416 | 13 Pkt/10m | 13 Pkt/10m | 3.47 Volt | 0 | 0 |
| 1761838215 | 11 Pkt/10m | 11 Pkt/10m | 3.49 Volt | 0 | 0 |
| 1761837014 | 10 Pkt/10m | 10 Pkt/10m | 3.53 Volt | 0 | 0 |
| 1761835812 | 9 Pkt/10m | 9 Pkt/10m | 3.55 Volt | 0 | 0 |
| 1761834611 | 9 Pkt/10m | 9 Pkt/10m | 3.57 Volt | 0 | 0 |
| 1761833410 | 10 Pkt/10m | 10 Pkt/10m | 3.59 Volt | 0 | 0 |
| 1761832209 | 12 Pkt/10m | 12 Pkt/10m | 3.59 Volt | 0 | 0 |
| 1761831007 | 9 Pkt/10m | 9 Pkt/10m | 3.63 Volt | 0 | 0 |
| 1761829806 | 10 Pkt/10m | 10 Pkt/10m | 3.63 Volt | 0 | 0 |
| 1761827403 | 10 Pkt/10m | 10 Pkt/10m | 3.67 Volt | 0 | 0 |
| 1761826202 | 12 Pkt/10m | 12 Pkt/10m | 3.67 Volt | 0 | 0 |
| 1761825001 | 12 Pkt/10m | 12 Pkt/10m | 3.68 Volt | 0 | 0 |
| 1761823799 | 13 Pkt/10m | 13 Pkt/10m | 3.7 Volt | 0 | 0 |
| 1761822598 | 12 Pkt/10m | 12 Pkt/10m | 3.72 Volt | 0 | 0 |
| 1761821397 | 13 Pkt/10m | 13 Pkt/10m | 3.74 Volt | 0 | 0 |
| 1761820196 | 11 Pkt/10m | 11 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761818994 | 9 Pkt/10m | 9 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761817793 | 11 Pkt/10m | 11 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761816592 | 18 Pkt/10m | 18 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761815390 | 5 Pkt/10m | 5 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761814747 | 1 Pkt/10m | 0 Pkt/10m | 3.82 Volt | 0 | 0 |
| 1761814727 | 0 Pkt/10m | 0 Pkt/10m | 3.92 Volt | 0 | 0 |
| 1761814113 | 4 Pkt/10m | 2 Pkt/10m | 3.9 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)