This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761938954 | 0 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
| 1761936734 | 0 Count | 1272 Count | 0 Count | 0 VDC | 0 VDC |
| 1761934514 | 0 Count | 944 Count | 0 Count | 0 VDC | 0 VDC |
| 1761932294 | 0 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1761930073 | 0 Count | 295 Count | 0 Count | 0 VDC | 0 VDC |
| 1761927853 | 0 Count | 1236 Count | 0 Count | 0 VDC | 0 VDC |
| 1761925633 | 0 Count | 911 Count | 0 Count | 0 VDC | 0 VDC |
| 1761923413 | 0 Count | 575 Count | 0 Count | 0 VDC | 0 VDC |
| 1761921193 | 0 Count | 247 Count | 0 Count | 0 VDC | 0 VDC |
| 1761919573 | 0 Count | 1290 Count | 0 Count | 0 VDC | 0 VDC |
| 1761917353 | 0 Count | 941 Count | 0 Count | 0 VDC | 0 VDC |
| 1761915133 | 0 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1761912913 | 0 Count | 341 Count | 0 Count | 0 VDC | 0 VDC |
| 1761910693 | 0 Count | 1032 Count | 0 Count | 0 VDC | 0 VDC |
| 1761908472 | 0 Count | 697 Count | 0 Count | 0 VDC | 0 VDC |
| 1761906252 | 0 Count | 377 Count | 0 Count | 0 VDC | 0 VDC |
| 1761904032 | 0 Count | 1356 Count | 0 Count | 0 VDC | 0 VDC |
| 1761901812 | 0 Count | 993 Count | 0 Count | 0 VDC | 0 VDC |
| 1761899592 | 0 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1761897973 | 0 Count | 523 Count | 0 Count | 0 VDC | 0 VDC |
| 1761895752 | 0 Count | 259 Count | 0 Count | 0 VDC | 0 VDC |
| 1761893532 | 0 Count | 1332 Count | 0 Count | 0 VDC | 0 VDC |
| 1761891312 | 0 Count | 979 Count | 0 Count | 0 VDC | 0 VDC |
| 1761889092 | 0 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1761886872 | 0 Count | 338 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)