This is the latest recevied telemetry packets stored in our database for station/object USERYP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764281110 | 4.26 VDC | 20.92 VDC | 0 | 0 | 0 |
| 1764280507 | 4.18 VDC | 21.88 VDC | 0 | 0 | 0 |
| 1764279907 | 4.18 VDC | 22.06 VDC | 0 | 0 | 0 |
| 1764279306 | 4.18 VDC | 21.72 VDC | 0 | 0 | 0 |
| 1764278705 | 4.19 VDC | 21.74 VDC | 0 | 0 | 0 |
| 1764278104 | 4.18 VDC | 21.32 VDC | 0 | 0 | 0 |
| 1764277504 | 4.19 VDC | 21.64 VDC | 0 | 0 | 0 |
| 1764276902 | 4.19 VDC | 21.62 VDC | 0 | 0 | 0 |
| 1764276301 | 4.2 VDC | 21.7 VDC | 0 | 0 | 0 |
| 1764275700 | 4.2 VDC | 21.42 VDC | 0 | 0 | 0 |
| 1764275099 | 4.2 VDC | 21.6 VDC | 0 | 0 | 0 |
| 1764274499 | 4.2 VDC | 21.82 VDC | 0 | 0 | 0 |
| 1764273898 | 4.21 VDC | 21.46 VDC | 0 | 0 | 0 |
| 1764273297 | 4.22 VDC | 21.86 VDC | 0 | 0 | 0 |
| 1764272697 | 4.22 VDC | 21.68 VDC | 0 | 0 | 0 |
| 1764272096 | 4.23 VDC | 21.92 VDC | 0 | 0 | 0 |
| 1764271495 | 4.25 VDC | 21.64 VDC | 0 | 0 | 0 |
| 1764270894 | 4.26 VDC | 5.5 VDC | 0 | 0 | 0 |
| 1764270293 | 4.21 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764269692 | 4.2 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764269092 | 4.19 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764268491 | 4.17 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764267890 | 4.14 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764267289 | 4.15 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764266689 | 4.13 VDC | 5.44 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)