This is the latest recevied telemetry packets stored in our database for station/object DO7LM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762185177 | 4.25 V | 30 | 0 | 0 | 0 |
| 1762185060 | 4.43 V | 29 | 0 | 0 | 0 |
| 1762184943 | 4.43 V | 28 | 0 | 0 | 0 |
| 1762184826 | 4.42 V | 29 | 0 | 0 | 0 |
| 1762184709 | 4.43 V | 29 | 0 | 0 | 0 |
| 1762184358 | 4.43 V | 28 | 0 | 0 | 0 |
| 1762184124 | 4.49 V | 26 | 0 | 0 | 0 |
| 1762184007 | 4.49 V | 25 | 0 | 0 | 0 |
| 1762183773 | 4.49 V | 26 | 0 | 0 | 0 |
| 1762183654 | 4.49 V | 29 | 0 | 0 | 0 |
| 1762183537 | 4.49 V | 28 | 0 | 0 | 0 |
| 1762183420 | 4.48 V | 27 | 0 | 0 | 0 |
| 1762183302 | 4.49 V | 26 | 0 | 0 | 0 |
| 1762183068 | 4.48 V | 26 | 0 | 0 | 0 |
| 1762182951 | 4.49 V | 28 | 0 | 0 | 0 |
| 1762182834 | 4.49 V | 29 | 0 | 0 | 0 |
| 1762182717 | 4.51 V | 28 | 0 | 0 | 0 |
| 1762182600 | 4.48 V | 26 | 0 | 0 | 0 |
| 1762182483 | 4.49 V | 26 | 0 | 0 | 0 |
| 1762182367 | 4.49 V | 27 | 0 | 0 | 0 |
| 1762182250 | 4.49 V | 27 | 0 | 0 | 0 |
| 1762182133 | 4.49 V | 27 | 0 | 0 | 0 |
| 1762182016 | 4.49 V | 28 | 0 | 0 | 0 |
| 1762181897 | 4.49 V | 26 | 0 | 0 | 0 |
| 1762181780 | 4.48 V | 27 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)