This is the latest recevied telemetry packets stored in our database for station/object SP4HMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781408410 | 610 Count | 575 Count | 327 Count | 0 VDC | 0 VDC |
| 1781407809 | 608 Count | 573 Count | 326 Count | 0 VDC | 0 VDC |
| 1781407209 | 605 Count | 571 Count | 324 Count | 0 VDC | 0 VDC |
| 1781406608 | 603 Count | 569 Count | 323 Count | 0 VDC | 0 VDC |
| 1781406007 | 601 Count | 567 Count | 322 Count | 0 VDC | 0 VDC |
| 1781405407 | 598 Count | 565 Count | 320 Count | 0 VDC | 0 VDC |
| 1781404805 | 596 Count | 563 Count | 319 Count | 0 VDC | 0 VDC |
| 1781404205 | 594 Count | 561 Count | 318 Count | 0 VDC | 0 VDC |
| 1781403604 | 591 Count | 559 Count | 316 Count | 0 VDC | 0 VDC |
| 1781403003 | 589 Count | 557 Count | 315 Count | 0 VDC | 0 VDC |
| 1781402403 | 587 Count | 555 Count | 314 Count | 0 VDC | 0 VDC |
| 1781401802 | 584 Count | 553 Count | 312 Count | 0 VDC | 0 VDC |
| 1781401202 | 582 Count | 551 Count | 311 Count | 0 VDC | 0 VDC |
| 1781400601 | 580 Count | 549 Count | 310 Count | 0 VDC | 0 VDC |
| 1781400000 | 577 Count | 547 Count | 308 Count | 0 VDC | 0 VDC |
| 1781399400 | 575 Count | 545 Count | 307 Count | 0 VDC | 0 VDC |
| 1781398799 | 573 Count | 543 Count | 306 Count | 0 VDC | 0 VDC |
| 1781398198 | 570 Count | 541 Count | 304 Count | 0 VDC | 0 VDC |
| 1781397598 | 568 Count | 539 Count | 303 Count | 0 VDC | 0 VDC |
| 1781396997 | 566 Count | 537 Count | 302 Count | 0 VDC | 0 VDC |
| 1781396396 | 563 Count | 535 Count | 300 Count | 0 VDC | 0 VDC |
| 1781395796 | 561 Count | 533 Count | 299 Count | 0 VDC | 0 VDC |
| 1781395195 | 559 Count | 531 Count | 298 Count | 0 VDC | 0 VDC |
| 1781394594 | 556 Count | 529 Count | 296 Count | 0 VDC | 0 VDC |
| 1781393994 | 554 Count | 527 Count | 295 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)