This is the latest recevied telemetry packets stored in our database for station/object SV0SYH-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779826169 | 76 Count | 842 Count | 65 Count | 4.09 VDC | 0 VDC |
| 1779824365 | 68 Count | 719 Count | 58 Count | 4.07 VDC | 0 VDC |
| 1779822562 | 58 Count | 623 Count | 49 Count | 4.1 VDC | 0 VDC |
| 1779820759 | 51 Count | 539 Count | 43 Count | 4.1 VDC | 0 VDC |
| 1779818956 | 42 Count | 448 Count | 35 Count | 4.1 VDC | 0 VDC |
| 1779815350 | 22 Count | 259 Count | 17 Count | 4.11 VDC | 0 VDC |
| 1779809974 | 127 Count | 949 Count | 114 Count | 4.13 VDC | 0 VDC |
| 1779804573 | 86 Count | 573 Count | 76 Count | 4.13 VDC | 0 VDC |
| 1779797353 | 42 Count | 222 Count | 36 Count | 4.13 VDC | 0 VDC |
| 1779795550 | 25 Count | 134 Count | 20 Count | 4.2 VDC | 0 VDC |
| 1779792973 | 145 Count | 1055 Count | 135 Count | 4.19 VDC | 0 VDC |
| 1779791170 | 133 Count | 977 Count | 124 Count | 4.17 VDC | 0 VDC |
| 1779787564 | 105 Count | 749 Count | 98 Count | 4.04 VDC | 0 VDC |
| 1779783826 | 67 Count | 480 Count | 63 Count | 4.06 VDC | 0 VDC |
| 1779780220 | 38 Count | 273 Count | 36 Count | 4.05 VDC | 0 VDC |
| 1779778417 | 21 Count | 158 Count | 20 Count | 4.03 VDC | 0 VDC |
| 1779773947 | 218 Count | 897 Count | 197 Count | 4.06 VDC | 0 VDC |
| 1779766771 | 159 Count | 591 Count | 146 Count | 4.05 VDC | 0 VDC |
| 1779764967 | 142 Count | 521 Count | 130 Count | 4.05 VDC | 0 VDC |
| 1779763169 | 125 Count | 462 Count | 114 Count | 4.05 VDC | 0 VDC |
| 1779761361 | 108 Count | 401 Count | 98 Count | 4.05 VDC | 0 VDC |
| 1779757755 | 79 Count | 282 Count | 71 Count | 4.06 VDC | 0 VDC |
| 1779754147 | 47 Count | 168 Count | 41 Count | 4.06 VDC | 0 VDC |
| 1779748978 | 194 Count | 1042 Count | 176 Count | 4.06 VDC | 0 VDC |
| 1779747176 | 177 Count | 970 Count | 160 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)