This is the latest recevied telemetry packets stored in our database for station/object KB4YTM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768639055 | 254 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768637255 | 253 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768635454 | 252 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768633653 | 251 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768631852 | 250 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768630052 | 249 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768628251 | 248 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768626450 | 247 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768624658 | 246 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768622857 | 245 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768621056 | 244 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768619255 | 242 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768617455 | 238 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768615654 | 237 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768613853 | 236 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768612053 | 235 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768610252 | 234 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768608451 | 233 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768606650 | 232 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768604849 | 231 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768603057 | 230 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768601256 | 229 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768599455 | 228 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768597655 | 227 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768595854 | 226 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)