This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774451344 | 203 Count | 992 Count | 155 Count | 4.12 VDC | 4.3 VDC |
| 1774450443 | 201 Count | 973 Count | 154 Count | 4.11 VDC | 4.32 VDC |
| 1774449544 | 197 Count | 948 Count | 151 Count | 4.11 VDC | 4.3 VDC |
| 1774449535 | 192 Count | 948 Count | 151 Count | 4.1 VDC | 5.38 VDC |
| 1774448634 | 190 Count | 927 Count | 150 Count | 4.11 VDC | 5.38 VDC |
| 1774447735 | 185 Count | 905 Count | 146 Count | 4.11 VDC | 5.38 VDC |
| 1774446834 | 181 Count | 885 Count | 143 Count | 4.11 VDC | 5.38 VDC |
| 1774445934 | 177 Count | 871 Count | 140 Count | 4.11 VDC | 5.38 VDC |
| 1774445034 | 174 Count | 858 Count | 138 Count | 4.11 VDC | 5.38 VDC |
| 1774444135 | 172 Count | 841 Count | 137 Count | 4.11 VDC | 5.38 VDC |
| 1774443235 | 167 Count | 822 Count | 133 Count | 4.11 VDC | 5.38 VDC |
| 1774442335 | 163 Count | 807 Count | 130 Count | 4.11 VDC | 5.38 VDC |
| 1774441435 | 160 Count | 794 Count | 128 Count | 4.11 VDC | 5.38 VDC |
| 1774440536 | 154 Count | 771 Count | 123 Count | 4.11 VDC | 5.38 VDC |
| 1774439637 | 150 Count | 758 Count | 120 Count | 4.11 VDC | 5.38 VDC |
| 1774438737 | 146 Count | 743 Count | 117 Count | 4.11 VDC | 5.4 VDC |
| 1774437836 | 142 Count | 725 Count | 114 Count | 4.11 VDC | 5.38 VDC |
| 1774436936 | 139 Count | 698 Count | 112 Count | 4.11 VDC | 5.4 VDC |
| 1774436037 | 134 Count | 664 Count | 108 Count | 4.11 VDC | 5.38 VDC |
| 1774435137 | 132 Count | 646 Count | 107 Count | 4.11 VDC | 5.4 VDC |
| 1774434237 | 127 Count | 623 Count | 103 Count | 4.11 VDC | 5.4 VDC |
| 1774433338 | 123 Count | 596 Count | 100 Count | 4.11 VDC | 5.4 VDC |
| 1774432437 | 120 Count | 576 Count | 98 Count | 4.15 VDC | 5.24 VDC |
| 1774431539 | 116 Count | 553 Count | 95 Count | 4.11 VDC | 5.4 VDC |
| 1774430640 | 113 Count | 529 Count | 93 Count | 4.11 VDC | 5.4 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)