This is the latest recevied telemetry packets stored in our database for station/object SP8KSR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785092298 | 336 Count | 365 Count | 336 Count | 0 VDC | 0 VDC |
| 1785090498 | 306 Count | 333 Count | 306 Count | 0 VDC | 0 VDC |
| 1785088697 | 290 Count | 315 Count | 290 Count | 0 VDC | 0 VDC |
| 1785086911 | 268 Count | 291 Count | 268 Count | 0 VDC | 0 VDC |
| 1785085111 | 247 Count | 268 Count | 247 Count | 0 VDC | 0 VDC |
| 1785083311 | 226 Count | 244 Count | 226 Count | 0 VDC | 0 VDC |
| 1785081511 | 206 Count | 222 Count | 206 Count | 0 VDC | 0 VDC |
| 1785079711 | 185 Count | 199 Count | 185 Count | 0 VDC | 0 VDC |
| 1785077911 | 160 Count | 173 Count | 160 Count | 0 VDC | 0 VDC |
| 1785076111 | 122 Count | 133 Count | 122 Count | 0 VDC | 0 VDC |
| 1785074311 | 108 Count | 117 Count | 108 Count | 0 VDC | 0 VDC |
| 1785072511 | 92 Count | 99 Count | 92 Count | 0 VDC | 0 VDC |
| 1785070710 | 67 Count | 72 Count | 67 Count | 0 VDC | 0 VDC |
| 1785068910 | 35 Count | 38 Count | 35 Count | 0 VDC | 0 VDC |
| 1785067110 | 1 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1785065306 | 914 Count | 988 Count | 914 Count | 0 VDC | 0 VDC |
| 1785063506 | 893 Count | 965 Count | 893 Count | 0 VDC | 0 VDC |
| 1785061706 | 873 Count | 942 Count | 873 Count | 0 VDC | 0 VDC |
| 1785059906 | 847 Count | 915 Count | 847 Count | 0 VDC | 0 VDC |
| 1785058105 | 823 Count | 889 Count | 823 Count | 0 VDC | 0 VDC |
| 1785056305 | 806 Count | 870 Count | 806 Count | 0 VDC | 0 VDC |
| 1785054505 | 781 Count | 842 Count | 781 Count | 0 VDC | 0 VDC |
| 1785052705 | 759 Count | 818 Count | 759 Count | 0 VDC | 0 VDC |
| 1785050904 | 742 Count | 799 Count | 742 Count | 0 VDC | 0 VDC |
| 1785049104 | 722 Count | 777 Count | 722 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)