This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768843047 | 6 | 882 | 422 | 51 | 0 |
| 1768840084 | 8 | 853 | 422 | 56 | 0 |
| 1768837455 | 3 | 826 | 422 | 50 | 0 |
| 1768832244 | 0 | 792 | 422 | 49 | 0 |
| 1768829704 | 6 | 778 | 419 | 53 | 0 |
| 1768827079 | 7 | 766 | 423 | 50 | 0 |
| 1768824079 | 4 | 760 | 422 | 52 | 0 |
| 1768821079 | 5 | 753 | 422 | 50 | 0 |
| 1768818501 | 7 | 752 | 421 | 51 | 0 |
| 1768815501 | 3 | 758 | 420 | 50 | 0 |
| 1768813226 | 7 | 761 | 421 | 52 | 0 |
| 1768811044 | 5 | 765 | 422 | 50 | 0 |
| 1768808154 | 4 | 770 | 419 | 53 | 0 |
| 1768805988 | 4 | 775 | 421 | 52 | 0 |
| 1768803412 | 6 | 780 | 421 | 54 | 0 |
| 1768800412 | 6 | 786 | 421 | 54 | 0 |
| 1768798081 | 3 | 803 | 419 | 53 | 0 |
| 1768796689 | 4 | 798 | 418 | 54 | 0 |
| 1768794066 | 6 | 806 | 421 | 48 | 0 |
| 1768791065 | 5 | 816 | 418 | 56 | 0 |
| 1768788359 | 7 | 824 | 416 | 52 | 0 |
| 1768785450 | 7 | 837 | 417 | 51 | 0 |
| 1768782450 | 7 | 856 | 415 | 54 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)