This is the latest recevied telemetry packets stored in our database for station/object W4KEL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757814946 | 12.01 | 30.03 | 0 | 0 | 0 |
| 1757812902 | 12.1 | 32.48 | 0 | 0 | 0 |
| 1757810859 | 12.04 | 32.96 | 0 | 0 | 0 |
| 1757808814 | 12.04 | 34.92 | 0 | 0 | 0 |
| 1757806769 | 12.04 | 36.88 | 0 | 0 | 0 |
| 1757804723 | 12.1 | 38.83 | 0 | 0 | 0 |
| 1757802677 | 12.13 | 40.3 | 0 | 0 | 0 |
| 1757800630 | 12.22 | 41.28 | 0 | 0 | 0 |
| 1757798582 | 12.28 | 40.79 | 0 | 0 | 0 |
| 1757796535 | 12.28 | 41.28 | 0 | 0 | 0 |
| 1757794487 | 12.31 | 41.28 | 0 | 0 | 0 |
| 1757792440 | 12.36 | 40.79 | 0 | 0 | 0 |
| 1757790392 | 12.39 | 38.83 | 0 | 0 | 0 |
| 1757788346 | 12.39 | 37.37 | 0 | 0 | 0 |
| 1757786301 | 12.39 | 35.41 | 0 | 0 | 0 |
| 1757784256 | 12.39 | 32.96 | 0 | 0 | 0 |
| 1757782212 | 12.39 | 31.01 | 0 | 0 | 0 |
| 1757780169 | 12.39 | 28.07 | 0 | 0 | 0 |
| 1757778126 | 12.36 | 25.63 | 0 | 0 | 0 |
| 1757776083 | 12.16 | 23.18 | 0 | 0 | 0 |
| 1757774042 | 12.04 | 21.23 | 0 | 0 | 0 |
| 1757772000 | 11.93 | 19.76 | 0 | 0 | 0 |
| 1757769959 | 11.95 | 18.78 | 0 | 0 | 0 |
| 1757767918 | 11.93 | 17.81 | 0 | 0 | 0 |
| 1757765877 | 11.87 | 17.81 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)