This is the latest recevied telemetry packets stored in our database for station/object SQ9SIM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789679468 | 852 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789675867 | 850 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789672284 | 848 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789668682 | 846 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789665081 | 844 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789661479 | 842 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789657878 | 840 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789654276 | 838 Count | 329 Count | 316 Count | 0 VDC | 0 VDC |
| 1789650674 | 832 Count | 325 Count | 312 Count | 0 VDC | 0 VDC |
| 1789647073 | 830 Count | 325 Count | 312 Count | 0 VDC | 0 VDC |
| 1789643471 | 828 Count | 325 Count | 312 Count | 0 VDC | 0 VDC |
| 1789639870 | 826 Count | 325 Count | 312 Count | 0 VDC | 0 VDC |
| 1789636268 | 824 Count | 325 Count | 312 Count | 0 VDC | 0 VDC |
| 1789632666 | 822 Count | 325 Count | 312 Count | 0 VDC | 0 VDC |
| 1789629083 | 815 Count | 320 Count | 307 Count | 0 VDC | 0 VDC |
| 1789625481 | 800 Count | 307 Count | 294 Count | 0 VDC | 0 VDC |
| 1789621880 | 782 Count | 291 Count | 278 Count | 0 VDC | 0 VDC |
| 1789618278 | 775 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
| 1789614677 | 773 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
| 1789611075 | 771 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
| 1789607473 | 769 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
| 1789603872 | 767 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
| 1789600270 | 765 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
| 1789596669 | 763 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
| 1789593067 | 761 Count | 286 Count | 273 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)