This is the latest recevied telemetry packets stored in our database for station/object SP6RSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770085652 | 93 Count | 136 Count | 29 Count | 4.09 VDC | 0 VDC |
| 1770085351 | 91 Count | 133 Count | 28 Count | 4.09 VDC | 0 VDC |
| 1770085050 | 90 Count | 131 Count | 28 Count | 4.09 VDC | 0 VDC |
| 1770084750 | 87 Count | 128 Count | 27 Count | 4.09 VDC | 0 VDC |
| 1770084449 | 85 Count | 123 Count | 26 Count | 4.08 VDC | 0 VDC |
| 1770084148 | 84 Count | 122 Count | 26 Count | 4.08 VDC | 0 VDC |
| 1770083847 | 81 Count | 118 Count | 25 Count | 4.08 VDC | 0 VDC |
| 1770083547 | 79 Count | 113 Count | 24 Count | 4.07 VDC | 0 VDC |
| 1770083246 | 78 Count | 110 Count | 24 Count | 4.08 VDC | 0 VDC |
| 1770082945 | 76 Count | 109 Count | 24 Count | 4.11 VDC | 0 VDC |
| 1770082645 | 74 Count | 104 Count | 23 Count | 4.08 VDC | 0 VDC |
| 1770082344 | 73 Count | 104 Count | 23 Count | 4.07 VDC | 0 VDC |
| 1770082043 | 70 Count | 102 Count | 22 Count | 4.07 VDC | 0 VDC |
| 1770081743 | 68 Count | 98 Count | 21 Count | 4.07 VDC | 0 VDC |
| 1770081442 | 67 Count | 96 Count | 21 Count | 4.09 VDC | 0 VDC |
| 1770081141 | 65 Count | 95 Count | 21 Count | 4.08 VDC | 0 VDC |
| 1770080841 | 64 Count | 92 Count | 21 Count | 4.09 VDC | 0 VDC |
| 1770080540 | 63 Count | 89 Count | 21 Count | 4.09 VDC | 0 VDC |
| 1770080239 | 60 Count | 85 Count | 20 Count | 4.09 VDC | 0 VDC |
| 1770079938 | 58 Count | 82 Count | 19 Count | 4.07 VDC | 0 VDC |
| 1770079638 | 57 Count | 80 Count | 19 Count | 4.08 VDC | 0 VDC |
| 1770079337 | 54 Count | 77 Count | 18 Count | 4.08 VDC | 0 VDC |
| 1770079036 | 52 Count | 72 Count | 17 Count | 4.08 VDC | 0 VDC |
| 1770078736 | 51 Count | 71 Count | 17 Count | 4.09 VDC | 0 VDC |
| 1770078435 | 48 Count | 68 Count | 16 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)