This is the latest recevied telemetry packets stored in our database for station/object EA4ATS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773420119 | 14 Count | 960 Count | 0 Count | 0 VDC | 0 VDC |
| 1773418315 | 13 Count | 901 Count | 0 Count | 0 VDC | 0 VDC |
| 1773416512 | 12 Count | 849 Count | 0 Count | 0 VDC | 0 VDC |
| 1773414708 | 11 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1773412905 | 10 Count | 744 Count | 0 Count | 0 VDC | 0 VDC |
| 1773411101 | 9 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1773409298 | 8 Count | 559 Count | 0 Count | 0 VDC | 0 VDC |
| 1773407494 | 7 Count | 500 Count | 0 Count | 0 VDC | 0 VDC |
| 1773405691 | 6 Count | 397 Count | 0 Count | 0 VDC | 0 VDC |
| 1773403920 | 5 Count | 347 Count | 0 Count | 0 VDC | 0 VDC |
| 1773402116 | 4 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1773400313 | 3 Count | 220 Count | 0 Count | 0 VDC | 0 VDC |
| 1773398510 | 2 Count | 170 Count | 0 Count | 0 VDC | 0 VDC |
| 1773396706 | 1 Count | 121 Count | 0 Count | 0 VDC | 0 VDC |
| 1773394903 | 0 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1773393099 | 7 Count | 1061 Count | 0 Count | 0 VDC | 0 VDC |
| 1773391296 | 6 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1773389496 | 5 Count | 761 Count | 0 Count | 0 VDC | 0 VDC |
| 1773387689 | 4 Count | 590 Count | 0 Count | 0 VDC | 0 VDC |
| 1773385918 | 3 Count | 403 Count | 0 Count | 0 VDC | 0 VDC |
| 1773384115 | 2 Count | 257 Count | 0 Count | 0 VDC | 0 VDC |
| 1773382312 | 1 Count | 150 Count | 0 Count | 0 VDC | 0 VDC |
| 1773380509 | 0 Count | 79 Count | 0 Count | 0 VDC | 0 VDC |
| 1773378705 | 18 Count | 1053 Count | 0 Count | 0 VDC | 0 VDC |
| 1773376902 | 17 Count | 983 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)